Hose clamps for fixing hoses, Page 5
-
Worm buckles W; with pressed strip
-
HTW hose clamps; with high tightening torque
-
DW hose clamps; with perforated band
-
BW endless belts; for individual buckle production
-
Hose clamps QLW; with snap-on house
-
PMW hose clamps; miniature strength design
-
Hose clamps PW; strength design
-
Mounting brackets KW; version with rubber insert
-
Hose clamps SW; wire version
-
Hose clamps PUW; suction hose PUR1
-
Hose clamps FXW;extraction hoses with 0.4 to 0.75 mm wall
-
FXPW hose clamps; suction hoses with wall from 1.45 mm
-
Hose clamps PWD2; strength version with two screws
-
Hose clamps EW; deformation version with eyelets
-
Hose clamps FW; spring design smooth inside
-
EGW hose clamps; deformation version with insert
-
Hose clamps CBW; deformation lock design
-
FBW hose clamps; spring version
-
LPH press rings; low pressure design
-
Hose clamp stands; practical stands
Bestsellers

EGW deformation hose coupling with a range of 11.3-13.3 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

LPH press ring with a diameter of 30 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 40-60 mm. Manufactured according to DIN 3016. With house and tightening...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and...

PMW 11mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 32-50 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...

EGW deformation hose coupling with a range of 10.3-12.3 mm and a tape width of 7.4 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 80-100 mm. Manufactured according to DIN 3016. With house and tightening...

Deformation hose coupling EWD1 with a range of 28 to 31 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and tightening...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

Deformation hose clamp EWS4 range 13,8 to 16,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Hose clamp PW1 103 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

EGW deformation hose coupling with a range of 12.3-14.3 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hose clamp PW1 130 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

LPH press ring with a diameter of 28 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 25-40 mm. Manufactured according to...

DW hose clamps with perforated band in material finish W2 with band width 8,5 mm and range 25/40 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...

PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp PW1 112 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

PW1 121 mm strength hose clamp with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry...

LPH press ring with a diameter of 38 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Deformation hose coupling EWD1 with a range of 34 to 37 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Deformation hose coupling EWD1 with a range of 31 to 34 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

PW4 55mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-50 mm. Manufactured according to DIN 3016. With house and...

DW hose clamps with perforated band in material finish W2 with band width 12,7 mm and range 80-100 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...

Hose clamp designed for hose diameters 25-45 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 40-60 mm. Manufactured according to...

Hose clamp designed for hose diameters 60-170 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 80-100 mm. Manufactured according to DIN 3016. With house and tightening...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 40-60 mm. Manufactured according to...

SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with band width 9 mm for hoses with a range of 90-110 mm. Manufactured according to...

Deformation hose clamp EWS4 range 15,3 to 17,5 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Hose clamp PW1 252 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...