Hose clamps for fixing hoses, Page 11
-
Worm buckles W; with pressed strip
-
HTW hose clamps; with high tightening torque
-
DW hose clamps; with perforated band
-
BW endless belts; for individual buckle production
-
Hose clamps QLW; with snap-on house
-
PMW hose clamps; miniature strength design
-
Hose clamps PW; strength design
-
Mounting brackets KW; version with rubber insert
-
Hose clamps SW; wire version
-
Hose clamps PUW; suction hose PUR1
-
Hose clamps FXW;extraction hoses with 0.4 to 0.75 mm wall
-
FXPW hose clamps; suction hoses with wall from 1.45 mm
-
Hose clamps PWD2; strength version with two screws
-
Hose clamps EW; deformation version with eyelets
-
Hose clamps FW; spring design smooth inside
-
EGW hose clamps; deformation version with insert
-
Hose clamps CBW; deformation lock design
-
FBW hose clamps; spring version
-
LPH press rings; low pressure design
-
Hose clamp stands; practical stands
Bestsellers

EGW deformation hose coupling with a range of 21.0-23.8 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 2.9-3.7 mm and a tape width of 5.5 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 23.0-25.6 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 23.3-26.3 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 2.5-2.9 mm and a tape width of 5.5 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Deformation hose clamp EWS4 range 24,1 to 27,0 mm with one eyelet and 7 mm wide band. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range 310-330 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 12-22 mm. Manufactured according to...

PWD 75 - 83 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...

PWD 83 - 91 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...

PWD 59 - 67 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...

FBW deformation clamp with a range of 19.2mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 150-170 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 265-285 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 160-180 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 180-200 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching right-hand spiral suction hose with foil construction in the range of 220-240 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 240-260 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 190-210 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 200-220 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 320-340 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 350-370 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range 450-470 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 500-520 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 280-320 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 400-420 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Hose clamp for attaching right-hand spiral suction hose with foil construction in the range 310-330 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect sealing thanks to the...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 130-150 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Mounting bracket KW with a diameter of 8 mm and a tape width of 12 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 140-160 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Deformation hose clamp EWS4 range 4,1 to 5,1 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Deformation hose clamp EWS4 range 19,5 to 21,8 mm with one eyelet and 7 mm wide strap. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Hose clamp SW1 - 65 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Deformation hose clamp EWS4 range 21,0 to 23,5 mm with one eyelet and 7 mm wide strap. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

SW4 70mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

SW4 75mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

SW4 80mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...