Steam Profi 210 hose for steam - 40/25 mm
Code: SP210-25Related products

Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

PW1 43 mm strength hose clamp with tightening screw on hinge bolt. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick...

PW4 43mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp designed for hose diameters 40-60 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Hose clamps with perforated belt in material finish W4 with a belt width of 8 mm in the range of 25-40 mm. According to SAE standard with house and tightening screw and hexagon...

DW hose clamps with perforated band in material finish W2 with band width 8,5 mm and range 25/40 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...

DW hose clamps with perforated tape in material finish W1 with a tape width of 8.5 mm and a range of 25-40 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of...

Screw hose clamps with 12 mm wide band and 38/50 mm range in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce the risk...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 25-40 mm. Manufactured according to DIN 3016. With house and tightening...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 25-40 mm. Manufactured according to...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses in the range of 25-40 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 25-40 mm. Manufactured according to...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 32-40 mm. Manufactured according to DIN 3016. With house and tightening...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-40 mm. Manufactured according to DIN 3016. With house and...
Product detailed description
Steam Hose Profi 210 for steam - SP210-25
- inner tube made of black EPDM, smooth, conductive; outer sheath made of black EPDM, extremely weather resistant
- reinforcement 2 high-strength steel braids; hose conforms to EN ISO 6134:2005-2A, electrically conductive R < 106 Ohm
- working temperature up to +210 °C, working pressure 18 bar, failure pressure 180 bar
- premium hose for pressure saturated steam transport up to +210 °C and maximum working pressure up to 18 bar; also suitable for pressurised hot water

Double-layer garden hose 30/25 mm made of soft PVC reinforced with a textile braid made of high-strength polyester fibre. A black opaque soul preventing the formation of algae...

PLE water and compressed air hoses with a diameter of 34/25 mm. Black tube and casing - oil and abrasion resistant with 1 textile braid.

Garden double-layered green PVC hose with 32/25 mm dimension, reinforced with high-strength PES fibre. Hoses for the transport of utility water, non-aggressive liquids and air.

Pressure hose for transport of pressure saturated steam up to +170 °C, diameter 39/25 mm with red stripe. Reinforcement high-strength textile braid; working temperature -40/+170...

Pressure hose for pressurised hot water mixed with steam and for conveying coolants with a diameter of 34/25 mm. Black EPDM inner tube, temperature, coolant and ozone resistant....

Multi-purpose black hose with blue stripe in 35/25 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

Pressure hose with hose diameter 33/25 mm in black. Designed primarily for the transport of hot media - water, air and chemicals, especially in the plastics industry. Inner tube...

Inner tube and outer casing made of SBR/NBR rubber - black, abrasion and weather resistant, 36/25 mm diameter. Reinforcement high-strength textile braid and steel spiral. Hose...

Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion in dimensions 39/25 mm. Outer shell made of SBR rubber - black, abrasion and weather...

Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion, dimensions 37/25 mm. Outer shell made of SBR rubber - black, abrasion and weather...

Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion, dimensions 33/25 mm. Outer shell made of SBR rubber - black, abrasion and weather...

Double-layer garden hose 30/25 mm made of soft PVC reinforced with a textile braid made of high-strength polyester fibre. Green transparent soul preventing the formation of...

Flexible hose 36/25 mm for transport of unleaded fuels, heating oil and compressed air, electrically conductive hose. NBR inner tube, black smooth, CR/NBR sheath black smooth,...

Black SBR barrel, black SBR sleeve 34/25 mm diameter with longitudinal positive grooving, textile pressure braid. Hose designed for the transport of water and glycol-based...

Blue pressure hose 34/25 mm in condensate-resistant PVC with one textile braid. Special hoses designed for transporting compressed air to pneumatic tools, spraying equipment...

Beige pressure hose 34/25 mm in condensate-resistant PVC with one textile braid. Special hoses designed for transporting compressed air to pneumatic tools, spraying equipment...
Be the first who will post an article to this item!
Be the first who will post an article to this item!
![]() |
![]() |
Multinational company with offices in the Czech Republic
The company Gates Hydraulics sro, which belongs to the multinational giant Gates Corporation, has been based in the Nové Pole industrial zone in Karviná since 2005. The conglomerate was founded in 1911 and is still headquartered in Denver, USA. It currently has offices in North and South America, Europe, Asia and Australia. The Czech facility specializes mainly in the production of hoses and metal hose ends. We offer high-pressure, premium hoses for the transport of fuels and mineral oils and low-pressure hoses suitable for the transport of cooling emulsions, water or air.
![]() |
Vision and missionThe entire giant company is united by a single vision: to be number 1 in its field. Gates Hydraulics sro therefore meets the evaluation parameters of the world standard and constantly strives to improve its technical solutions in the field of hydraulic hoses and their components. The company's mission is to create an organization and culture that is capable of continuously delivering superior products, services and experiences that exceed customer expectations, ensuring steady growth in market share, profit and return on invested capital, which the company is already achieving on a global scale. |