Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Hoses / Pressure hoses with braid; air - oil - gases / RWC cooling hoses; for the plastics industry / RWC hose for cooling water red - 15/9 mm

    RWC hose for cooling water red - 15/9 mm

    Code: RWCR-9 RWCR-9-R50 Choose variant
    Not rated
    52 Kč 1 851 Kč from 52 Kč –3 %
    rwc hadice chladici kapalina plast prumysl
    52 Kč 1 851 Kč from 52 Kč –3 % 50 Kč / m 1 795 Kč / pcs from 50 Kč / m 41 Kč excl. VAT 1 483 Kč excl. VAT from 41 Kč excl. VAT – 36 Kč / 1 m –
    up to 20 days Stock (2 pcs) Choose variant
    Measuring unit ?
    Chosen variant is not available. Reset selected parameters.
    Delivery to:
    21.01.2025 25.12.2024 Choose variant
    Plastic red hoses for cooling water for injection moulds in blue version with a diameter of 15/9 mm. Double-layered design made of soft PVC, reinforced with a textile braid made of high strength polyester fibre, clear inner soul, coloured outer jacket to indicate water entering and leaving the mould. The operating temperature range is -5/+60°C, short-term possible up to +90°C.

    Detailed information

    Related products

    W1 screw hose clamp - 12/20 mm
    Tip
    8 Kč –12 %
    W1 screw hose clamp - 12/20 mm
    Stock (>1000 pcs)
    6 Kč excl. VAT
    7 Kč

    Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 12-20 mm. Manufactured according to DIN 3016. With house and tightening...

    Code: W1-020
    Worm hose clamp W2 - 9/20mm
    Tip
    11 Kč –9 %
    Worm hose clamp W2 - 9/20mm
    Stock (>1000 pcs)
    8 Kč excl. VAT
    10 Kč

    Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 12-20 mm. Manufactured according to...

    Code: W2-020
    Hose clamp screw W4 - 9/20mm
    Tip
    Hose clamp screw W4 - 9/20mm
    Stock (>1000 pcs)
    12 Kč excl. VAT
    14 Kč

    Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 12-20 mm. Manufactured according to DIN 3016. With house and tightening...

    Code: W4-020
    HTW spona hadicova 12mm
    Hose clamp screw HTW1 - 15/24 mm
    Stock (161 pcs)
    36 Kč excl. VAT
    44 Kč

    Worm hose clamps with a band width of 12 mm and a range of 15 -24 mm in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce...

    Code: HTW1-12-024
    Hose clip DW1-8 - 10/16 mm
    Hose clip DW1-8 - 10/16 mm
    Stock (>1000 pcs)
    4 Kč excl. VAT
    5 Kč

    DW hose clamps with perforated band in material finish W1 with band width 8,5mm and range 10-16 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of galvanized...

    Code: DW1-8-016
    dw4 spona hadicova 9mm
    9 Kč –11 %
    Hose clamp DW2-8 - 10/16 mm
    Stock (501 pcs)
    7 Kč excl. VAT
    8 Kč

    DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 10-16 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...

    Code: DW2-8-016
    Hose clamp DW4-8 - 10/16 mm
    12 Kč –8 %
    Hose clamp DW4-8 - 10/16 mm
    Stock (631 pcs)
    9 Kč excl. VAT
    11 Kč

    Hose clamps with perforated band in material finish W4 with a band width of 8 mm in the range of 10-16 mm. According to SAE standard with house and tightening screw and hexagon...

    Code: DW4-8-016
    Hose clip PMW - 16mm
    Hose clip PMW - 16mm
    Stock (>1000 pcs)
    7 Kč excl. VAT
    8 Kč

    PMW 16mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

    Code: PMW1-9-16
    Hose clip EWD1 - 15mm
    Tip
    9 Kč –11 %
    Hose clip EWD1 - 15mm
    Stock (765 pcs)
    7 Kč excl. VAT
    8 Kč

    Deformation hose coupling EWD1 with a range of 13 to 15 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

    Code: EWD1-15
    ews4 spona hadicova
    19 Kč –5 %
    Hose clamp EWS4 - 15 mm
    Stock (10 pcs)
    15 Kč excl. VAT
    18 Kč

    Deformation hose clamp EWS4 range 13,0 to 15,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

    Code: EWS4-15
    Deformation hose clamp EGW4-17
    34 Kč –5 %
    Deformation hose clamp EGW4-17
    Stock (50 pcs)
    26 Kč excl. VAT
    32 Kč

    EGW deformation hose coupling with a range of 14.6-16.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

    Code: EGW4-17
    Hose clip FW1 - 15mm
    Hose clip FW1 - 15mm
    Stock (414 pcs)
    5 Kč excl. VAT
    6 Kč

    Deformation hose coupling FW1 with a range of 15 mm with spring effect. Made of W1 material - white galvanized steel, RoHS compliant. For installation when compensating for...

    Code: FW1-15
    FBW hose clip - 15.6mm
    5 Kč –20 %
    FBW hose clip - 15.6mm
    up to 14 days
    3 Kč excl. VAT
    4 Kč

    FBW deformation clamp with a range of 15.6mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

    Code: FBDW1-156
    W1 screw hose clamp - 12/22 mm
    Tip
    6 Kč –16 %
    W1 screw hose clamp - 12/22 mm
    Stock (>1000 pcs)
    4 Kč excl. VAT
    5 Kč

    Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hose range 12-22 mm. Manufactured according to DIN 3016. With house and tightening screw and...

    Code: W1-022
    Worm hose clamp W4 - 9/22 mm
    Tip
    12 Kč –8 %
    Worm hose clamp W4 - 9/22 mm
    Stock (>1000 pcs)
    9 Kč excl. VAT
    11 Kč

    Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 12-22 mm. Manufactured according to DIN 3016. With house and tightening...

    Code: W4-022
    W2 screw hose clamp - 9/22 mm
    Tip
    9 Kč –11 %
    W2 screw hose clamp - 9/22 mm
    up to 14 days
    7 Kč excl. VAT
    8 Kč

    Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 12-22 mm. Manufactured according to...

    Code: W2-022
    Show all related products Previous product Next product

    Product detailed description

    Specially designed hose for the plastics industry - RWCR-9

    • plastic hoses for cooling water for injection moulds
    • double-layer design made of soft PVC, reinforced with a textile braid made of high-strength polyester fibre
    • clear inner tube, blue or red outer shell to indicate water entering and leaving the mould
    • working temperature -5/+60°C, short-term up to +90°C

    Additional parameters

    Category: RWC cooling hoses for the plastics industry
    Pressure: 17 bar
    Barva: Red
    Material: PVC
    Medium: Cooling water
    Temperature: -5/+60 °C
    Outer diameter: 15 mm
    Inner diameter: 9 mm

    Be the first who will post an article to this item!

    Do not fill out this field:

    Be the first who will post an article to this item!

    Do not fill out this field:

    Byť světová špička, stále jako rodinný podnik

    Na ploše skoro 28 000 metrů čtverečních se dnes rozkládá společnost vynikající výrobou vzduchových a hydraulických hadic a sortimentu pro aplikaci pneumatických pohonů v průmyslu - Mebra Plastik Italia SpA. Jak sám název napovídá, sídlo společnosti se nachází v italském Busto Arsizio, odkud se se svými výrobky dostala až od světového popředí ve svém oboru. Filosofie firmy spočívá v rodinném vedení společnosti, která téměř před 50 lety začínala právě jako rodinný podnik a v tomto stylu pokračuje i dnes, byť se ve vedení Membra Plastik vystřídaly již 3 generace. Úzký vztah mezi vedením a zaměstnanci ve spojení s 50 let předávanými zkušenostmi a moderními technologiemi znamená, že se zákazník na kvalitu produktů může zcela spolehnout.

    		 membra-plastik-hadice-italie-1
    membra-plastik-hadice-italie-3

    Touha po dokonalosti

    Membra Plastik v současnosti znamená celosvětově zavedenou značku, jejíž výrobky jsou vyhledávaným zbožím jak u velkých průmyslových společností, tak i v zemědělství nebo v dílenském prostředí. Za oblibou značky však stojí mnohaletá snaha o vyvinutí těch nejspolehlivějších produktů a nasazení přísných norem kvality. Velké plus zejména hydraulických a pneumatických hadic jsou jedinečné technologické vlastnosti, které v mnoha případech předčí svou konkurenci. V roce 2016 navíc Membra Plastik zahájila provoz nové továrny, čímž zdvojnásobila svou produktivitu. 

    Nabízený sortiment značky Membra Plastik naleznete níže.