Compressed air hose, Page 19
- Plastic hoses; PUJ - PA - PTF - PE
- Pressure hoses with braid; air - oil - gases
- Suction and transport hoses; reinforced hoses
- Spiral hoses; for all tools
- Eschbach fire hoses; flat hoses for firefighters
- Connecting hoses; for pressure assemblies
- Hose clamps; various types and designs
- Winding drums; open and closed construction
- Boards and floor coverings; rubber
- V-belts; smooth, serrated, multiple
- Hose accessories; pliers, holders, reels...
Bestsellers
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm and straight ends.
Clear hose with 18/14 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...
Designed for TPU 10 × 14 hose type with a length of 25 m. The drum is made of galvanized steel, which is powder-coated and UV-resistant. Supplied with 2 m supply hose. Total...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 6 x 4 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2500 mm and straight ends.
The blue plastic spiral hose 12/8 mm polyurethane, 1 m long, including fitted hose ends, is characterized by high resistance to breakage, abrasion and pressure. The small...
The blue plastic spiral hose 12/8 mm made of polyurethane in a length of 7.5 m, including fitted hose ends, is characterised by high resistance to breakage, abrasion and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. 1" threaded version in 1500 mm length and straight end caps.
FoxiPro PUR L suction hose with a diameter of 80 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Hose clamp for attaching right-hand spiral suction hose in the range 72-92 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
FBW deformation clamp with a range of 7.6 mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 1500 mm with straight and...
DW hose clamps with perforated band in material finish W2 with band width 12,7 mm and range 60-80 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...
FoxiPro PUR L suction hose with a diameter of 40 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. 1" threaded version in 2000 mm length and straight end caps.
Hose clamp SW1 - 16mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...
ES male male quick coupling DN7,2 with coupling nut and protective spring for 8 x 10 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...
Hose clamp designed for hose diameters 60-110 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 100-120 mm. Manufactured according to...
Hose made of PU Elastollan C-98 cyan, size 12/8 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 70-90 mm. Manufactured according to DIN 3016. With house and tightening...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 70-90 mm. Manufactured according to DIN 3016. With house and tightening...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 8 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
Mounting bracket KW with a diameter of 35 mm and a tape width of 20 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...
Blue-black plastic hose, 10/8 mm. Made of branded Elastollan C98 granulate. Suitable for multiple connections to pneumatic cylinders and valves. Operating temperature -40/+60 °C...