Compressed air hose, Page 18
- Plastic hoses; PUJ - PA - PTF - PE
- Pressure hoses with braid; air - oil - gases
- Suction and transport hoses; reinforced hoses
- Spiral hoses; for all tools
- Eschbach fire hoses; flat hoses for firefighters
- Connecting hoses; for pressure assemblies
- Hose clamps; various types and designs
- Winding drums; open and closed construction
- Boards and floor coverings; rubber
- V-belts; smooth, serrated, multiple
- Hose accessories; pliers, holders, reels...
Bestsellers
High quality red spiral hose 8/5.5 mm with extreme spiral return capability of 5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed for...
High quality yellow spiral hose 8/5.5 mm with extreme spiral return capability of 5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed...
Fixed fitting with G1/4" female pipe thread for 5 x 8 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.
High quality blue spiral hose 12/8 mm with extreme spiral return capability of 12.5 m and long service life. Made of branded granulate elastollan 1190 without end quick...
High quality blue spiral hose 12/8 mm with extreme spiral return capability of 15 m and long service life. Made of branded granulate elastollan 1190 without end quick...
Clear hose with dimensions 10/6 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...
EGW deformation hose coupling with a range of 17.1-19.3 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
The blue plastic spiral hose 10/6.5 mm polyurethane, 10 m long, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The small...
The blue plastic spiral hose 6/4 mm polyurethane, 10 m long, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The small...
The blue plastic spiral hose 6/4 mm polyurethane, 15 m long, including fitted hose ends, is characterized by high resistance to breakage, abrasion and pressure. The small...
Black 6/4 mm hose manufactured to DIN 73378 with excellent durability. Designed especially for truck and commercial vehicle air brake systems.
The blue plastic spiral hose 8/5 mm made of polyurethane in length of 15 m, including fitted end caps, is characterised by high resistance to breakage, abrasion and pressure....
Green PUJ polyurethane tubing 16/11 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 10 x 6,5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
High quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 5 m and long service life. Made of branded granulate elastollan 1190 without end quick...
Hose clamp designed for hose diameters 60-270 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 110 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
High quality blue spiral hose 10/6,5 mm with extreme spiral return capability of 5 m and long service life. Made of branded granulate elastollan 1190 without end quick...
Hose clamp PW1 91 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Hose clamp PW1 97 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1500 mm and straight end...
FoxiPro PUR L suction hose with a diameter of 102 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...
PW4 28mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Fixed fitting with G1/4" female pipe thread for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...
Hose clamp PW1 130 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
PW4 22mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 25mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
FoxiPro PUR L suction hose with a diameter of 120 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Hose endless belt with a width of 14 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm and straight end...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2500 mm and straight end...
Strength hose clamp SW1 - 60mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...
Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and tightening...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.