Compressed air hose, Page 14
- Plastic hoses; PUJ - PA - PTF - PE
- Pressure hoses with braid; air - oil - gases
- Suction and transport hoses; reinforced hoses
- Spiral hoses; for all tools
- Eschbach fire hoses; flat hoses for firefighters
- Connecting hoses; for pressure assemblies
- Hose clamps; various types and designs
- Winding drums; open and closed construction
- Boards and floor coverings; rubber
- V-belts; smooth, serrated, multiple
- Hose accessories; pliers, holders, reels...
Bestsellers
PW4 43mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
EGW deformation hose coupling with a range of 10.3-12.3 mm and a tape width of 7.4 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Deformation hose clamp EWS4 range 10,8 to 12,8 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening screw and...
DW hose clamps with perforated band in material finish W2 with band width 12,7 mm and range 50-70 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...
Hard nylon tubing in 4/2.5mm blue with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...
The blue plastic spiral hose 8/5 mm made of polyurethane, 5 m long, including fitted hose ends, is characterized by high resistance to breakage, abrasion and pressure. The small...
The 10/6 mm Teflon TFE Milk Tubing are tubing with excellent resistance to chemicals and high temperature. Ideal dielectric properties, resistance to the effects of oxygen,...
Blue pressure hose 11/6 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...
Suction hose PUR1 with a diameter of 40 mm made of abrasion-resistant polyurethane foil with a steel wire spiral. Designed for suction and ventilation of air, non-aggressive...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 65 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
Hose clamp SW1 - 18mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...
Plastic polyurethane hose 12/8 mm made of Elastollan 1198. White in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....
Special pliers for cutting air ducts up to 15 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.
Red hose with dimensions 8/6 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals and...
High-quality pressure-suction hose for water and liquids, with an inner diameter of 51 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...
Hard nylon tubing in blue 8/6mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water, oils,...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and...
Vacuum hose with an inner diameter of 32 mm and an operating temperature of -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard....
Hard nylon tubing in black 4/2.5 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...
Blue plastic hose with 12/9 mm diameter and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high flexibility...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 16-25 mm. Manufactured according to...
Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 32-50 mm. According to SAE standard with house and tightening screw and...
Hose clamp PW1 51 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Low-cost plastic spiral hose 10/6.5 mm polyurethane, 7.5 m long, including quick couplers in blue. The small diameter of the spiral saves space. Polyurethane flexible hose for...
PW4 73mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
EGW deformation hose coupling with a range of 14.6-16.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Black 6/4 mm hose manufactured to DIN 73378 with excellent durability. Designed especially for truck and commercial vehicle air brake systems.
Hose clamp PW1 85 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...
DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 10-16 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Hose made of PU Elastollan C-98 cyan, size 10/7 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...
PMW 13mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 20-32 mm. Manufactured according to DIN 3016. With house and tightening...