Compressed air hose, Page 13
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 110-130 mm. Manufactured according to DIN 3016. With house and tightening...

Special pliers for cutting air ducts up to 15 mm in red. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.

Hose clamp designed for hose diameters 60-215 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Special green-white PVC pool hose with inner diameter 20 mm. Designed for light suction and pumping of water and other liquids or for transporting other non-abrasive solid...

PW1 43 mm strength hose clamp with tightening screw on hinge bolt. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick...

Hose made of PU Elastollan C-98 yellow, size 8/6 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 10 x 6,5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Hose made of PU Elastollan C-98 yellow, size 10/8 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

FoxiPro PUR L suction hose with a diameter of 60 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

EGW deformation hose coupling with a range of 14.6-16.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 6.3-7.5 mm and a tape width of 6.4 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hose made of PU Elastollan C-98 clear, 8/5,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Blue pressure hose 18,5/13 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...

Deformation hose coupling EWD1 with a range of 17 to 20 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

The blue plastic spiral hose 8/5 mm made of polyurethane in length of 15 m, including fitted end caps, is characterised by high resistance to breakage, abrasion and pressure....

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 9 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 90-110 mm. Manufactured according to DIN 3016. With house and tightening...

Hose clamps with perforated belt in material finish W4 with a belt width of 8 mm in the range of 25-40 mm. According to SAE standard with house and tightening screw and hexagon...

PU Elastollan C-98 silver hose, 8/6 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C with...

Blue pressure hose 18,5/13 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...

PMW 10mm hose clamps for hoses with small diameters. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

PW4 39mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

EGW deformation hose coupling with a range of 13.9-16.1 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

High-quality pressure-suction hose for water and liquids, with an inner diameter of 60 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...

FBW deformation clamp with a range of 13.3mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

Deformation hose coupling EWD1 with a range of 28 to 31 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Hose made of PU Elastollan C-98 cyan, size 8/5,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

Hose made of PU Elastollan C-98 cyan, size 12/9 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

Black hose with 8/6 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

Vacuum hose with inner diameter 22 mm and working temperature -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...