Grilamid pipe in roll 28 / 23 - 14 bar
Code: GRB-R25-28Related products

Straight socket couplings for air piping with outer pipe thread G 1" for pipe with outer diameter 28 mm. Simple Air Push socket system that can be disassembled again. No special...

Straight socket couplings for air piping with internal pipe thread G 1" for pipe with outer diameter 28 mm. Simple Air Push socket system that can be disassembled again. No...

Corner socket fitting for air piping up to 16 atmospheres. Version with external pipe thread G 1/2". For pipe with outer diameter 15 mm. Simple Tectite socket system that can be...

Socket coupling in straight version for 28 mm pipe. Simple Air Push socket system that can be disassembled again. No special tools are required for the installation of the air...

Corner socket coupling 90° - 28 mm for compressed air piping. Simple Air Push socket system that can be disassembled again. No special tools are required for installation, which...

Socket t-coupling for 28 mm pipes. Simple Air Push socket system that can be disassembled again. No special tools are required for the installation of the air distribution...

T-coupling for 28 mm pipes with reduced branch 22 mm. Simple Air Push socket system that can be disassembled again. No special tools are required for the installation of the air...

Socket for 28 mm pipes. Simple Air Push socket system that can be disassembled again. No special tools are required for the installation of the air distribution system....

Corner socket coupling 28 mm for compressed air piping. Simple Air Push socket system that can be disassembled again. No special tools are required for installation, which is...

Pliers for removing couplings of the Air Push pipe system with a pipe diameter of 28 mm.

Removal sleeve for air distribution 28 mm. A simple sleeve that makes it easy to disassemble the air ducts. No special tools are required for the installation of the air...

Manual deburring scraper for air ductwork. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...

Pipe deburrer for pipe diameter 15 - 50 mm. Operating temperature -20 °C to 70 °C. Working pressure -0.6 to 12 bar.

T-coupling for 28 mm pipes with reduced branch 18 mm. Simple Air Push socket system that can be disassembled again. No special tools are required for the installation of the air...
Product detailed description
Grilamid PA12 tubes for air distribution - 28/23 mm
- Plastic pipes made of a special version of polyamide PA12 - grilamid
- Self-extinguishing pipe design, perfect resistance to pressure, oil and sunlight
- Tubes for air distribution up to 14 atmospheres
- Operating temperature -30/+70°C with a hardness of 70°Sh
- Designed primarily for compressed air piping in industry and craft
Additional parameters
Category: | AIR Push compressed air piping |
---|---|
Version: | Trumpets |
Pressure: | 14 bar |
Length: | 25 m |
Material: | Grilamide PA12 |
Medium: | Compressed air |
Working temperature: | -30 / 70 °C |
Average: | 28 mm |
Hardness: | 70°N |
Conduit: | 28 mm |

Powder-coated blue aluminium pipe of 28/25 mm in length 6 m for piping of compressed air and inert gases up to 12.5 bar. Pipe material - AW-6060 T6 alloy.

Tube made of grilamid PA12 for plastic design of compressed air pipelines. Pipe dimensions 28/23 mm with a recommended operating pressure of 14 bar. The classic blue colour for...

Plastic pipe PA12 for compressed air piping. Pipe size 28 / 24 mm with recommended operating pressure 10 bar. Classic blue colour as marking for air ducts. Easy connection with...

Plastic roll 25 m - PA12 for compressed air piping. Pipe size 28 / 24 mm with recommended operating pressure 10 bar. Classic blue colour as marking for air ducts. Easy...

Powder-coated blue aluminium pipe of 28/25 mm in 3 m length for piping of compressed air and inert gases up to 12.5 bar. Pipe material - AW-6060 T6 alloy.
Be the first who will post an article to this item!
Be the first who will post an article to this item!
Being world-leading, still as a family businessOn an area of almost 28,000 square metres, today there is a company that excels in the production of air and hydraulic hoses and a range of products for the application of pneumatic actuators in industry - Mebra Plastik Italia SpA. As the name suggests, the company's headquarters are located in Busto Arsizio, Italy, where it has taken its products to the top of the world in its field. The company's philosophy is based on family management, which started almost 50 years ago as a family business and continues in this style today, even though three generations have changed the management of Membra Plastik. The close relationship between management and employees, combined with 50 years of experience and modern technology, means that customers can rely on the quality of the products. |
![]() |
![]() |
Desire for perfectionMembra Plastik is now a globally established brand whose products are sought after by large industrial companies as well as in agricultural and workshop environments. However, the brand's popularity is due to many years of developing the most reliable products and deploying strict quality standards. A big plus of hydraulic and pneumatic hoses in particular is their unique technological properties, which in many cases surpass their competitors. In addition, in 2016 Membra Plastik launched a new factory, doubling its productivity. The Membra Plastik product range can be found below. |