VIP single-acting and double-acting axial valves

Axiáln ventil VIP jednočinný i dvočinný provedení
  • axial valves with pneumatic actuation in single-acting and double-acting versions
  • internal connection threads 3/8" to 2"
  • made of brass with NBR sealing

VIP double-acting pneumatic axial valves

Ordering
number
Threads
"
Luminosity
DN
Pressure
bar
Temperature
°C
Material
bodies
Material
seal
VIPD-38 3/8" 10 10 up to +80°C brass NBR
VIPD-12 1/2" 15 10 up to +80°C brass NBR
VIPD-34 3/4" 20 10 up to +80°C brass NBR
VIPD-10 1" 25 10 up to +80°C brass NBR
VIPD-54 1 1/4" 32 10 up to +80°C brass NBR
VIPD-15 1 1/2" 40 10 up to +80°C brass NBR
VIPD-20 2" 50 10 up to +80°C brass NBR

VIP single-acting pneumatic axial valves

Ordering
number
Threads
"
Luminosity
DN
Pressure
bar
Temperature
°C
Material
body
Material
seal
VIPS-38 3/8" 10 10 up to +80°C brass NBR
VIPS-12 1/2" 15 10 up to +80°C brass NBR
VIPS-34 3/4" 20 10 up to +80°C brass NBR
VIPS-10 1" 25 10 up to +80°C brass NBR
VIPS-54 1 1/4" 32 10 up to +80°C brass NBR
VIPS-15 1 1/2" 40 10 up to +80°C brass NBR
VIPS-20 2" 50 10 up to +80°C brass NBR

#ShowMore#

FUNCTION DESCRIPTION

VIP valves have the actuator built into the valve body. The moving piston is driven by air. The piston will seat if it moves in the direction of the media flow. This stops the media flow. The seat is perfectly tight. The pressure required to move the piston is independent of the media pressure. The resulting VIP valve therefore saves space and the full flow ensures minimal pressure loss.

Closed valve

When compressed air is supplied to bore A (bore B must be relieved), the piston seats and the valve is closed. In the case of the single-acting NC design, the piston contacts the seat unless compressed air is supplied to bore B. Uzavřený ventil axiální ventil

Transition phase

During the transition phase (shown in the picture is the conversion to the open position of the double-acting design), one of the two holes is under pressure. The piston moves axially in alternating open and closed states. In the case of the single-acting NC design, the spring closes and the piston moves towards the seat (if the valve is not controlled). In the case of the single-acting NO design, the spring opens and the piston moves away from the seat (if the valve is not controlled). The valve opening and closing cycle takes less than a second. Přechodová fáze ventil axiální ventil

Open valve

When air pressure is applied to bore B (bore A must be relieved) the piston moves away from the seat and the valve is opened. In the case of the single-acting NO design, the piston is furthest from the seat unless the control air pressure is supplied to bore A. Otevřený ventil axiální ventil

Bestsellers

Single acting pneumatic valves VIP - 2"
13 820 Kč –99 %
Single acting pneumatic valves VIP - 2"
up to 14 days
Code: VIPS-20
Was: 13 820 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
VIP Single Acting Pneumatic Valves - 1 1/2"
9 999 Kč –99 %
Was: 9 999 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
VIP Single Acting Pneumatic Valves - 1 1/4"
8 037 Kč –99 %
Was: 8 037 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Single acting pneumatic valves VIP - 1"
5 929 Kč –99 %
Single acting pneumatic valves VIP - 1"
up to 14 days
Code: VIPS-10
Was: 5 929 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Single acting pneumatic valves VIP - 3/4"
5 329 Kč –99 %
Was: 5 329 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Single acting pneumatic valves VIP - 1/2"
4 480 Kč –99 %
Was: 4 480 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Single acting pneumatic valves VIP - 3/8"
4 026 Kč –99 %
Was: 4 026 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Double acting pneumatic valves VIP - 2"
12 971 Kč –99 %
Double acting pneumatic valves VIP - 2"
up to 14 days
Code: VIPD-20
Was: 12 971 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Double Acting Pneumatic Valves VIP - 1 1/2"
9 340 Kč –99 %
Was: 9 340 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
Double Acting Pneumatic Valves VIP - 1 1/4"
7 510 Kč –99 %
Was: 7 510 Kč  (–99 %)
1 Kč
(1 Kč excl. VAT)
2 items total
Double Acting Pneumatic Valves VIP - 1 1/2"
9 340 Kč –99 %
1 Kč excl. VAT
1 Kč / pcs

VIP double acting axial pneumatic valves with G1 1/2" thread, DN 40 clearance. Connection via internal threads according to DIN2999. Made of brass with NBR seal for temperatures...

Code: VIPD-15
VIP Single Acting Pneumatic Valves - 1 1/2"
9 999 Kč –99 %
1 Kč excl. VAT
1 Kč / pcs

VIP single-acting axial pneumatic valves with G1 1/2" thread, DN 40 clearance. Connection via internal threads according to DIN2999. Made of brass with NBR seal for temperatures...

Code: VIPS-15