Ball valves and fittings, Page 3
- Ball valves; water - air - gas
- Ball valves; industrial design
- Gate valves - valves - filters; shut-off of various lines
- Air-operated tappets; single-acting and double-acting versions
- Electrically operated taps; electronically controlled taps
- Separate drives; pneumatic drives-electric drives
Bestsellers
double-acting pneumatic actuator DAN connection of actuators using ISO 5211 flanges for F10/12 flange with 27 mm square and 480 Nm torque. Material : anodized aluminium, NBR...
Electric actuator VCQ035-24D is used for closing industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 350 Nm with connection. to...
The VCQ050-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 500 Nm with connection. to...
The VCQ080-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 800 Nm with connection. to...
The VCQ110-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Torque 1 100 Nm with connection. to...
The VCQ600-230 electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Torque 6,000 Nm with connection. to...
Single-acting pneumatic actuator SRN connection of actuators using ISO 5211 flanges for F07/10 flange with 22 mm square and 120 Nm torque. Material : anodized aluminium, NBR...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F07/10 flange with 22 mm square and 180 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F05/07 flange with 14 mm square and 30 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F10/12 flange with 27 mm square and 360 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F10/12 flange with 36 mm square and 480 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection with ISO 5211 flanges for F05/07 flange with 17 mm square and 53 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection with ISO 5211 flanges for F05/07 flange with 17 mm square and 60 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F14 flange with 36 mm square and 720 Nm torque. Material : anodized aluminium, NBR gasket. Designed to...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for F07/10 flange with 22 mm square and 90 Nm torque. Material : anodized aluminium, NBR gasket. Designed...
Single-acting SRN pneumatic actuator connection using ISO 5211 flanges for 46 mm square flange F14 with 920 Nm torque. Material : anodized aluminium, NBR gasket. Designed to...
Ball valve Pekos 04TTT DN125 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of steel 1.0619. Designed for less aggressive...
Ball valve VL851 DN80 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for contact...
Ball valve Pekos 06TTT DN125 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN15 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN20 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN200 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN25 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN250 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN32 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN65 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
Ball valve Pekos 06TTT DN80 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of stainless steel 1.4408. Designed for contact...
ball valves for automation V153 with 1 1/2" thread in DN40. Brass ball valves with internal threads designed for automation by means of pneumatic actuator or electric actuator....
Three-way ball valve Pekos 84TTT DN100 with flanges. "L" ball drilling. Made of steel 1.0619. Designed for less aggressive media in industry.
Three-way ball valve Pekos 86TTT DN100 with flanges. "L" ball drilling. Made of stainless steel 1.4408. Designed for contact with aggressive media in harsh industrial environments.
Three-way ball valve Pekos 86TTT DN150 with flanges. "L" ball drilling. Made of stainless steel 1.4408. Designed for contact with aggressive media in harsh industrial environments.
ball valve for automation VL521T with 1/2" female thread in DN15. Threaded brass ball valves designed for automation with pneumatic or electric actuator. Three-piece direct...
Ball valve K809T with internal threads G1 1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Ball valve K809T with internal threads G1 1/4" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Ball valve K809T with internal threads G1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Ball valve K809T with internal threads G1/4" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Ball valve K809T with internal threads G2 1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Ball valve K809T with internal threads G3/8" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...
Electric actuator VCQ002-230 is used for closing industrial valves, especially ball valves and butterfly valves. Electrical version 230 VAC. Connection to fittings using ISO...
The VCQ002-24D electric actuator is used to close industrial valves, especially ball valves and butterfly valves. Electrical design 24 VDC. Connection to fittings using ISO 5211...