Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Fittings and faucets

    Ball valves and fittings

    In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

    #ShowMore#

    Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

    Distribution of fittings according to construction

    How to choose a fitting?

    Determining the correct fitting size

    If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

    Choosing the right material

    Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

    Determination of the working pressure and volume of the medium

    Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

    Later maintenance of the fitting is important

    Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

    Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

    Selection of faucet according to design

    Bestsellers

    Hex ball valves internal and external thread - 1/4"
    121 Kč –4 %
    Hex ball valves internal and external thread - 1/4"
    Stock (>1000 pcs)
    Code: BMA-14
    Was: 121 Kč  (–4 %)
    115 Kč
    (95 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/2"
    273 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/2"
    Stock (357 pcs)
    Code: BAA-12
    Was: 273 Kč  (–4 %)
    260 Kč
    (215 Kč excl. VAT)
    Hexagonal ball valves internal and external thread - 1/2"
    150 Kč –4 %
    Hexagonal ball valves internal and external thread - 1/2"
    Stock (>1000 pcs)
    Code: BMA-12
    Was: 150 Kč  (–4 %)
    143 Kč
    (118 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/4"
    382 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/4"
    Stock (11 pcs)
    Code: ART0802-14
    Was: 382 Kč  (–4 %)
    363 Kč
    (300 Kč excl. VAT)
    Thread filters ART44 1/2"
    154 Kč –5 %
    Thread filters ART44 1/2"
    Stock (17 pcs)
    Code: ART44-12
    Was: 154 Kč  (–5 %)
    146 Kč
    (121 Kč excl. VAT)
    Hex ball valves internal and external thread - 3/8"
    110 Kč –4 %
    Hex ball valves internal and external thread - 3/8"
    Stock (>1000 pcs)
    Code: BMA-38
    Was: 110 Kč  (–4 %)
    105 Kč
    (87 Kč excl. VAT)
    Ball valve for air 25 bar - 1/2"
    253 Kč –5 %
    Ball valve for air 25 bar - 1/2"
    Stock (175 pcs)
    Code: BA-12
    Was: 253 Kč  (–5 %)
    240 Kč
    (198 Kč excl. VAT)
    Ball valve for air 25 bar - 1/4"
    195 Kč –5 %
    Ball valve for air 25 bar - 1/4"
    Stock (828 pcs)
    Code: BA-14
    Was: 195 Kč  (–5 %)
    185 Kč
    (153 Kč excl. VAT)
    Ball valve for air 25 bar - 3/4"
    445 Kč –4 %
    Ball valve for air 25 bar - 3/4"
    Stock (518 pcs)
    Code: BA-34
    Was: 445 Kč  (–4 %)
    423 Kč
    (350 Kč excl. VAT)
    1/2" Air Ball Wing Valve
    390 Kč –4 %
    1/2" Air Ball Wing Valve
    Stock (5 pcs)
    Code: ART15SMV-12B
    Was: 390 Kč  (–4 %)
    371 Kč
    (307 Kč excl. VAT)
    Show more products
    81 items total
    Knife gate valve L20NEST - DN80
    20 174 Kč –100 %
    Knife gate valve L20NEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast...

    Code: L20NEST1-080
    Knife gate valve L20NEST - DN65
    31 242 Kč –100 %
    Knife gate valve L20NEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN65 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-065
    Knife gate valve L20NEST - DN80
    32 501 Kč –100 %
    Knife gate valve L20NEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of 1.4408...

    Code: L20NEST3-080
    Knife gate valve L20NEST - DN300
    72 951 Kč –100 %
    Knife gate valve L20NEST - DN300
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST1 foot gate valves with a clearance of DN300 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST1-300
    Knife gate valve L20NEST - DN400
    162 182 Kč –100 %
    Knife gate valve L20NEST - DN400
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST1 foot gate valves with a clearance of DN400 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST1-400
    Knife gate valve L20NEST - DN50
    18 490 Kč –99 %
    Knife gate valve L20NEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-050
    Knife gate valve L20ELEST - DN350
    210 173 Kč –100 %
    Knife gate valve L20ELEST - DN350
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with a clearance of DN350 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-350
    Knife gate valve L20ELEST - DN50
    112 802 Kč –100 %
    Knife gate valve L20ELEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-050
    Knife gate valve L20ELEST - DN500
    355 753 Kč –100 %
    Knife gate valve L20ELEST - DN500
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN500 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-500
    Knife gate valve L20ELEST - DN65
    124 967 Kč –100 %
    Knife gate valve L20ELEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST3 foot gate valves with DN65 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST3-065
    Knife gate valve L20NEST - DN500
    442 466 Kč –100 %
    Knife gate valve L20NEST - DN500
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN500 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-500
    Knife gate valve L20NEST - DN100
    21 682 Kč –100 %
    Knife gate valve L20NEST - DN100
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN100 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-100
    Knife gate valve L20NEST - DN150
    46 511 Kč –100 %
    Knife gate valve L20NEST - DN150
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN150 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-150
    Knife gate valve L20NEST - DN250
    101 163 Kč –100 %
    Knife gate valve L20NEST - DN250
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN250 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-250
    Knife gate valve L20NEST - DN350
    238 618 Kč –100 %
    Knife gate valve L20NEST - DN350
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN350 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-350
    Knife gate valve L20NEST - DN400
    270 665 Kč –100 %
    Knife gate valve L20NEST - DN400
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN400 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-400
    Knife gate valve L20NEST - DN450
    367 568 Kč –100 %
    Knife gate valve L20NEST - DN450
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN450 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-450
    Knife gate valve L20NEST - DN50
    30 349 Kč –100 %
    Knife gate valve L20NEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of 1.4408...

    Code: L20NEST3-050
    Knife gate valve L20NEST - DN300
    123 606 Kč –100 %
    Knife gate valve L20NEST - DN300
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN300 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-300
    Knife gate valve L20NEST - DN450
    227 448 Kč –100 %
    Knife gate valve L20NEST - DN450
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST1 foot gate valves with a clearance of DN450 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST1-450
    Knife gate valve L20NEST - DN500
    262 979 Kč –100 %
    Knife gate valve L20NEST - DN500
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN500 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-500
    Knife gate valve L20NEST - DN600
    331 553 Kč –100 %
    Knife gate valve L20NEST - DN600
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN600 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-600
    Knife gate valve L20NEST - DN65
    19 501 Kč –99 %
    Knife gate valve L20NEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN65 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-065
    Knife gate valve L20NEST - DN100
    34 316 Kč –100 %
    Knife gate valve L20NEST - DN100
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN100 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-100
    Knife gate valve L20NEST - DN125
    39 528 Kč –100 %
    Knife gate valve L20NEST - DN125
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN125 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-125
    Knife gate valve L20NEST - DN200
    67 740 Kč –100 %
    Knife gate valve L20NEST - DN200
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST3 foot gate valves with a clearance of DN200 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST3-200
    Knife gate valve L20ELEST - DN100
    117 691 Kč –100 %
    Knife gate valve L20ELEST - DN100
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN100 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-100
    Knife gate valve L20ELEST - DN150
    166 238 Kč –100 %
    Knife gate valve L20ELEST - DN150
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST3 foot gate valves with a clearance of DN150 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST3-150
    Knife gate valve L20NEST - DN150
    27 421 Kč –100 %
    Knife gate valve L20NEST - DN150
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with a clearance of DN150 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast...

    Code: L20NEST1-150
    Knife gate valve L20NEST - DN125
    24 434 Kč –100 %
    Knife gate valve L20NEST - DN125
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN125 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast...

    Code: L20NEST1-125
    Knife gate valve L20NEST - DN200
    45 472 Kč –100 %
    Knife gate valve L20NEST - DN200
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20NEST1 foot gate valves with a clearance of DN200 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of...

    Code: L20NEST1-200
    Knife gate valve L20NEST - DN250
    61 796 Kč –100 %
    Knife gate valve L20NEST - DN250
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with a clearance of DN250 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast...

    Code: L20NEST1-250
    Knife gate valve L20ELEST - DN50
    124 645 Kč –100 %
    Knife gate valve L20ELEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST3 foot gate valves with a clearance of DN50 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST3-050
    Knife gate valve L20ELEST - DN80
    129 052 Kč –100 %
    Knife gate valve L20ELEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST3 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST3-080
    Knife gate valve L20ELEST - DN125
    133 415 Kč –100 %
    Knife gate valve L20ELEST - DN125
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST3 with DN125 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST3-125
    Knife gate valve L20ELEST - DN300
    184 728 Kč –100 %
    Knife gate valve L20ELEST - DN300
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST1 foot gate valves with a clearance of DN300 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST1-300
    Knife gate valve L20ELEST - DN250
    174 422 Kč –100 %
    Knife gate valve L20ELEST - DN250
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST1 foot gate valves with a clearance of DN250 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST1-250
    Knife gate valve L20ELEST - DN600
    416 890 Kč –100 %
    Knife gate valve L20ELEST - DN600
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST1 foot gate valves with a clearance of DN600 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST1-600
    Knife gate valve L20ELEST - DN65
    113 226 Kč –100 %
    Knife gate valve L20ELEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN65 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-065
    Knife gate valve L20ELEST3 - DN100
    130 326 Kč –100 %
    Knife gate valve L20ELEST3 - DN100
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST3 foot gate valves with a clearance of DN100 are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive....

    Code: L20ELEST3-100
    Up
    More products