Ball valves and fittings
In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.
#ShowMore#
Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:
Distribution of fittings according to construction
- ball valve in conventional or industrial design - inside the ball valve there is a rotating drilled element, perpendicular to the pipe axis, which rotates 90°
- saddle valve - inside the circular seat is a cone that moves a screw perpendicular to the axis of the pipe
- gate valve - the working element is a flat plate with a hole that slides perpendicular to the pipe
How to choose a fitting?
Determining the correct fitting size
If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.
Choosing the right material
Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.
Determination of the working pressure and volume of the medium
Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.
Later maintenance of the fitting is important
Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.
Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:
Selection of faucet according to design
-
Ball valves; water - air - gas
-
Ball valves; industrial design
-
Gate valves - valves - filters; shut-off of various lines
-
Air-operated tappets; single-acting and double-acting versions
-
Electrically operated taps; electronically controlled taps
-
Separate drives; pneumatic drives-electric drives
Bestsellers
Ball valve Pekos 04TTT DN125 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of steel 1.0619. Designed for less aggressive...
Ball valve VL851 DN80 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for contact...
Flanged ball valves 04TTT with DN100 clearance. Single-acting version with SR360 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Ball valve VL851 DN65 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for contact...
VL851 flanged ball valves with DN100 clearance. Double-acting version with DA360 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...
Ball valve VL851 DN100 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for...
Ball valve Pekos 04TTT DN150 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of steel 1.0619. Designed for less aggressive...
VL851 flanged ball valves with DN100 clearance. Single-acting version with SR240 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...
Flanged ball valves 04TTT with DN100 clearance. Double-acting version with DA360 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN100 clearance. Double-acting version with DA240 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN125. Double-acting version with DA720 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN125. Double-acting version with DA480 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN15 clearance. Double-acting version with DA30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN150 clearance. Double-acting version with DA960 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN150 clearance. Double-acting version with DA720 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN20 clearance. Double-acting version with DA30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN200 clearance. Double-acting version with DA1920 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN200 clearance. Double-acting version with DA960 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN25 clearance. Double-acting version with DA30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN32. Double-acting version with DA60 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN40 clearance. Double-acting version with DA90 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN50 clearance. Double-acting version with DA120 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN65 clearance. Double-acting version with DA180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN80 clearance. Double-acting version with DA240 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN100 clearance. Single-acting version with SR240 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN125. Single-acting version with SR720 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN125. Single-acting version with SR480 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN15 clearance. Single-acting version with SR30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN150 clearance. Single-acting version with SR960 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN150 clearance. Single-acting version with SR720 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN20 clearance. Single-acting version with SR30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN200 clearance. Single-acting version with SR960 drive made of 1.0619 steel. Designed for pressures of 16 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN25 clearance. Single-acting version with SR30 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with clearance DN32. Single-acting version with SR60 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN40 clearance. Single-acting version with SR90 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN50 clearance. Single-acting version with SR120 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN65 clearance. Single-acting version with SR180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Flanged ball valves 04TTT with DN80 clearance. Single-acting version with SR240 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....
Ball valve Pekos 04TTT DN100 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of steel 1.0619. Designed for less aggressive...
Ball valve Pekos 04TTT DN100 with flanges. Construction length according to DIN3202-F4, ISO 10204-3.1 certificate included. Made of steel 1.0619. Designed for less aggressive...
