Ball valves and fittings

In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

#ShowMore#

Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

Distribution of fittings according to construction

ball valve in conventional or industrial design - inside the ball valve there is a rotating drilled element, perpendicular to the pipe axis, which rotates 90°
saddle valve - inside the circular seat is a cone that moves a screw perpendicular to the axis of the pipe
gate valve - the working element is a flat plate with a hole that slides perpendicular to the pipe

How to choose a fitting?

Determining the correct fitting size

If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

Choosing the right material

Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

Determination of the working pressure and volume of the medium

Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

Later maintenance of the fitting is important

Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

Selection of faucet according to design

Bestsellers

357 Kč –5 %

Gas ball valve internal threads - 3/8"

Code: ART4271-38

Was: 357 Kč (–5 %)

339 Kč

(280 Kč excl. VAT)

382 Kč –4 %

Ball valve 25 bar internal and external thread - 1/4"

(11 pcs)

Code: ART0802-14

Was: 382 Kč (–4 %)

363 Kč

(300 Kč excl. VAT)

121 Kč –4 %

Hex ball valves internal and external thread - 1/4"

(>1000 pcs)

Code: BMA-14

Was: 121 Kč (–4 %)

115 Kč

(95 Kč excl. VAT)

150 Kč –4 %

Hexagonal ball valves internal and external thread - 1/2"

(>1000 pcs)

Code: BMA-12

Was: 150 Kč (–4 %)

143 Kč

(118 Kč excl. VAT)

366 Kč –5 %

Gas ball valve internal threads - 1/2"

Code: ART4212-12

Was: 366 Kč (–5 %)

347 Kč

(287 Kč excl. VAT)

941 Kč –4 %

Lockable stainless steel tap - 1/2"

(3 pcs)

Code: KH12ES

Was: 941 Kč (–4 %)

894 Kč

(739 Kč excl. VAT)

124 Kč –4 %

Hex Ball Valves - 3/8"

(>1000 pcs)

Code: BM-38

Was: 124 Kč (–4 %)

118 Kč

(98 Kč excl. VAT)

110 Kč –4 %

Hex ball valves internal and external thread - 3/8"

(>1000 pcs)

Code: BMA-38

Was: 110 Kč (–4 %)

105 Kč

(87 Kč excl. VAT)

445 Kč –4 %

Ball valve for air 25 bar - 3/4"

(579 pcs)

Code: BA-34

Was: 445 Kč (–4 %)

423 Kč

(350 Kč excl. VAT)

253 Kč –5 %

Ball valve for air 25 bar - 1/2"

(288 pcs)

Code: BA-12

Was: 253 Kč (–5 %)

240 Kč

(198 Kč excl. VAT)

Show more products

27 items total

51 240 Kč –100 %

Ball valve VL140F - DN100

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN100 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-100

34 155 Kč –100 %

Ball valve VL140F - DN80

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN80 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-080

12 649 Kč –99 %

Ball valve VL140F - DN40

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN40 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-040

42 998 Kč –100 %

Ball valve VL140F with double-acting drive - DN80

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN80 clearance. Double-acting version with DA120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-080DA

49 966 Kč –100 %

Ball valve VL140F with single-acting drive - DN80

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN80 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-080SR

25 474 Kč –100 %

Ball valve VL140F - DN65

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN65 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-065

5 593 Kč –99 %

Ball valve VL140F - DN15

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN15 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-015

7 130 Kč –99 %

Ball valve VL140F - DN20

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN20 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-020

8 579 Kč –99 %

Ball valve VL140F - DN25

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN25 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-025

11 185 Kč –99 %

Ball valve VL140F - DN32

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN32 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-032

16 133 Kč –99 %

Ball valve VL140F - DN50

1 Kč excl. VAT

1 Kč / pcs

Ball valve VL140F DN50 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

Code: VL140F-050

61 869 Kč –100 %

Ball valve VL140F with double-acting drive - DN100

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN100 clearance. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-100DA

10 804 Kč –99 %

Ball valve VL140F with double-acting drive - DN15

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN15 clearance. Double-acting version with DA15 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-015DA

12 898 Kč –99 %

Ball valve VL140F with double-acting drive - DN20

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN20 clearance. Double-acting version with DA30 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-020DA

14 655 Kč –99 %

Ball valve VL140F with double-acting drive - DN25

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN25 clearance. Double-acting version with DA45 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-025DA

18 154 Kč –99 %

Ball valve VL140F with double-acting drive - DN32

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN32 clearance. Double-acting version with DA60 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-032DA

19 632 Kč –99 %

Ball valve VL140F with double-acting drive - DN40

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN40 clearance. Double-acting version with DA60 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-040DA

24 727 Kč –100 %

Ball valve VL140F with double-acting drive - DN50

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN50 clearance. Double-acting version with DA90 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-050DA

33 906 Kč –100 %

Ball valve VL140F with double-acting drive - DN65

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN65 clearance. Double-acting version with DA90 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-065DA

70 624 Kč –100 %

Ball valve VL140F with single-acting drive - DN100

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN100 clearance. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-100SR

12 488 Kč –99 %

Ball valve VL140F with single-acting drive - DN15

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN15 clearance. Single-acting version with SR15 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-015SR

14 025 Kč –99 %

Ball valve VL140F with single-acting drive - DN20

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN20 clearance. Single-acting version with SR15 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-020SR

16 616 Kč –99 %

Ball valve VL140F with single-acting drive - DN25

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN25 clearance. Single-acting version with SR30 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-025SR

21 697 Kč –100 %

Ball valve VL140F with single-acting drive - DN32

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN32 clearance. Single-acting version with SR45 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-032SR

23 058 Kč –100 %

Ball valve VL140F with single-acting drive - DN40

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN40 clearance. Single-acting version with SR60 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-040SR

29 397 Kč –100 %

Ball valve VL140F with single-acting drive - DN50

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN50 clearance. Single-acting version with SR90 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-050SR

41 285 Kč –100 %

Ball valve VL140F with single-acting drive - DN65

1 Kč excl. VAT

1 Kč / pcs

VL140F intermediate flange ball valves with DN65 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

Code: VL140F-065SR

Brands

Brightness DN

Connecting

Controls

Design of fittings

Material

Medium

Pressure

Seals

Standard

Thread

Thread design

Ball valves and fittings

Distribution of fittings according to construction

How to choose a fitting?

Determining the correct fitting size

Choosing the right material

Determination of the working pressure and volume of the medium

Later maintenance of the fitting is important

Selection of faucet according to design

Bestsellers

Login to your account

Ball valves and fittings

Distribution of fittings according to construction

How to choose a fitting?

Determining the correct fitting size

Choosing the right material

Determination of the working pressure and volume of the medium

Later maintenance of the fitting is important

Selection of faucet according to design

Bestsellers