Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Fittings and faucets

    Ball valves and fittings

    In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

    #ShowMore#

    Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

    Distribution of fittings according to construction

    How to choose a fitting?

    Determining the correct fitting size

    If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

    Choosing the right material

    Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

    Determination of the working pressure and volume of the medium

    Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

    Later maintenance of the fitting is important

    Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

    Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

    Selection of faucet according to design

    Bestsellers

    Hex ball valves internal and external thread - 1/4"
    121 Kč –4 %
    Hex ball valves internal and external thread - 1/4"
    Stock (>1000 pcs)
    Code: BMA-14
    Was: 121 Kč  (–4 %)
    115 Kč
    (95 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/2"
    273 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/2"
    Stock (357 pcs)
    Code: BAA-12
    Was: 273 Kč  (–4 %)
    260 Kč
    (215 Kč excl. VAT)
    Hexagonal ball valves internal and external thread - 1/2"
    150 Kč –4 %
    Hexagonal ball valves internal and external thread - 1/2"
    Stock (>1000 pcs)
    Code: BMA-12
    Was: 150 Kč  (–4 %)
    143 Kč
    (118 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/4"
    382 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/4"
    Stock (11 pcs)
    Code: ART0802-14
    Was: 382 Kč  (–4 %)
    363 Kč
    (300 Kč excl. VAT)
    Thread filters ART44 1/2"
    154 Kč –5 %
    Thread filters ART44 1/2"
    Stock (17 pcs)
    Code: ART44-12
    Was: 154 Kč  (–5 %)
    146 Kč
    (121 Kč excl. VAT)
    Hex ball valves internal and external thread - 3/8"
    110 Kč –4 %
    Hex ball valves internal and external thread - 3/8"
    Stock (>1000 pcs)
    Code: BMA-38
    Was: 110 Kč  (–4 %)
    105 Kč
    (87 Kč excl. VAT)
    Ball valve for air 25 bar - 1/2"
    253 Kč –5 %
    Ball valve for air 25 bar - 1/2"
    Stock (175 pcs)
    Code: BA-12
    Was: 253 Kč  (–5 %)
    240 Kč
    (198 Kč excl. VAT)
    Ball valve for air 25 bar - 1/4"
    195 Kč –5 %
    Ball valve for air 25 bar - 1/4"
    Stock (828 pcs)
    Code: BA-14
    Was: 195 Kč  (–5 %)
    185 Kč
    (153 Kč excl. VAT)
    Ball valve for air 25 bar - 3/4"
    445 Kč –4 %
    Ball valve for air 25 bar - 3/4"
    Stock (518 pcs)
    Code: BA-34
    Was: 445 Kč  (–4 %)
    423 Kč
    (350 Kč excl. VAT)
    1/2" Air Ball Wing Valve
    390 Kč –4 %
    1/2" Air Ball Wing Valve
    Stock (5 pcs)
    Code: ART15SMV-12B
    Was: 390 Kč  (–4 %)
    371 Kč
    (307 Kč excl. VAT)
    Show more products
    70 items total
    Ball valve VL001B - DN80
    Tip
    20 891 Kč –100 %
    Ball valve VL001B - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL001B with clearance DN80 with sleeve. Operated by lever and disassembled into three parts. The stainless steel material makes the tap suitable for contact with...

    Code: VL001B-080
    Shut-off valves UVC - DN80
    8 249 Kč –2 %
    Shut-off valves UVC - DN80
    up to 14 days
    6 681 Kč excl. VAT
    8 084 Kč / pcs

    Shut-off valves for continuous shut-off of pipelines for media up to +450°C. Clearance DN 80, manual operation by handwheel. Made of steel 1.0619, graphite gasket.

    Code: UVC-080
    Check valves RVD600 - DN80
    13 264 Kč –99 %
    Check valves RVD600 - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The RVD600 check valves for inter-flange connections with a clearance of DN 80 ensure the passage of the medium in one direction. Opening pressure at least 0.03 bar. Made of...

    Code: RVD600-080
    Three-way tap 86TTT - DN 80, drilling L
    189 706 Kč –100 %
    Three-way tap 86TTT - DN 80, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN80 clearance. Double-acting version with DA480 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-40L-080DA
    Three-way tap 86TTT - DN 80, drilling T
    189 706 Kč –100 %
    Three-way tap 86TTT - DN 80, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN80 clearance. Double-acting version with DA480 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-40T-080DA
    Ball valve VL140F - DN80
    34 155 Kč –100 %
    Ball valve VL140F - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL140F DN80 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

    Code: VL140F-080
    Three-way tap 84TTT - DN 80, drilling L
    116 066 Kč –100 %
    Three-way tap 84TTT - DN 80, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN80 clearance. Double-acting version with DA480 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-080DA
    Three-way tap 84TTT - DN 80, drilling L
    137 690 Kč –100 %
    Three-way tap 84TTT - DN 80, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN80 clearance. Single-acting version with SR480 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-080SR
    Two-piece stainless steel faucet - 3"
    Tip
    9 618 Kč –5 %
    Two-piece stainless steel faucet - 3"
    up to 14 days
    7 551 Kč excl. VAT
    9 137 Kč / pcs

    Stainless steel tap for industrial, food and chemical applications with internal threads G 3". It is a two-piece design of the tap with smaller dimensions than those specified...

    Code: 009V-080-316
    Knife gate valve L20NEST - DN80
    20 174 Kč –100 %
    Knife gate valve L20NEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast...

    Code: L20NEST1-080
    K809 Double Actuator Ball Valve - 3"
    46 321 Kč –100 %
    K809 Double Actuator Ball Valve - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K809 with female thread G3", clearance DN80. Double-acting version with DA240 drive made of A350 LF2 carbon steel. Designed for pressures up to 68 bar and...

    Code: K809T-30DA
    Ball valve K809 with single-acting drive - DN80
    54 549 Kč –100 %
    Ball valve K809 with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K809 with DN80 clearance. Double-acting version with SR240 drive made of A350 LF2 carbon steel. Designed for pressures up to 68 bar and temperatures up to 250°C....

    Code: K809W-080SR
    Knife gate valve L20NEST - DN80
    32 501 Kč –100 %
    Knife gate valve L20NEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of 1.4408...

    Code: L20NEST3-080
    PFC flange filters - DN80
    8 436 Kč –1 %
    PFC flange filters - DN80
    up to 14 days
    6 833 Kč excl. VAT
    8 268 Kč / pcs

    PFC flange filters for basic media filtration. Flanges according to EN 1092-1 type B. Line clearance DN 80, working pressure 40 bar. Sloped strainer for quick change without...

    Code: PFC-080
    Ball valve Pekos 02TTT DN80
    17 509 Kč –99 %
    Ball valve Pekos 02TTT DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve Pekos 02TTT DN80 with flanges. Construction length according to EN 558-1. Made of grey cast iron GG25. Designed for non-aggressive or moderately aggressive media in...

    Code: 02TTT-16-080
    Ball valve K809 with double-acting drive - DN80
    46 321 Kč –100 %
    Ball valve K809 with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K809 with DN80 clearance. Double-acting version with DA240 drive made of A350 LF2 carbon steel. Designed for pressures up to 68 bar and temperatures up to 250°C....

    Code: K809W-080DA
    Check valves ZKC DN80
    2 445 Kč –99 %
    Check valves ZKC DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The ZKC check valves for inter-flange connections with a clearance of DN 80 ensure the passage of the medium in one direction. Maximum flow velocity 3 m/s. Made of carbon steel,...

    Code: ZKC-080
    Ball valve VL851 - DN80
    39 675 Kč –100 %
    Ball valve VL851 - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL851 DN80 with flanges. Lever-operated, 2-piece design with construction length according to EN 558-1. Made of stainless steel 1.4408, designed primarily for contact...

    Code: VL851-080
    V101 elektropohon armatury kulovy kohout
    from 40 729 Kč –100 %
    Ball valve with electric drive V101 - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs
    Detail

    Direct ball valve V101 with 3" female pipe threads and electric actuator VCQ008. For sealing of pipelines of non-aggressive media up to 25 bar in industry.

    Code: V101-30VCQ24
    Three-way tap 84TTT - DN 80, T drilling
    116 066 Kč –100 %
    Three-way tap 84TTT - DN 80, T drilling
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN80 clearance. Double-acting version with DA480 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40T-080DA
    Ball valve K806T - 3"
    78 837 Kč –100 %
    Ball valve K806T - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with internal threads G3" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel...

    Code: K806T-30
    Ball valve K806W - DN80
    78 837 Kč –100 %
    Ball valve K806W - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809W with DN80 clearance. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel 1.4408, suitable for contact with...

    Code: K806W-080
    Ball valve VL851 with double-acting drive - DN80
    55 457 Kč –100 %
    Ball valve VL851 with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves VL851 with DN80 clearance. Double-acting version with DA240 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...

    Code: VL851-080DA
    Ball valve K806 with double-acting drive - DN80
    94 853 Kč –100 %
    Ball valve K806 with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN80 clearance. Double-acting version with DA240 drive made of stainless steel DIN 1,4408. Designed for pressures up to 68 bar and temperatures up to...

    Code: K806W-080DA
    Ball valve K806 with single-acting drive - DN80
    103 081 Kč –100 %
    Ball valve K806 with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN80 clearance. Double-acting version with SR240 drive made of stainless steel DIN 1,4408. Designed for pressures up to 68 bar and temperatures up to...

    Code: K806W-080SR
    K806 Single Actuator Ball Valve - 3"
    103 081 Kč –100 %
    K806 Single Actuator Ball Valve - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G3", clearance DN80. Single-acting version with SR240 drive made of stainless steel DIN 1,4408. Designed for pressures up to 68 bar and...

    Code: K806T-30SR
    Ball valve VL521B with double-acting drive - DN80
    41 651 Kč –100 %
    Ball valve VL521B with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521B with clearance DN80. Double-acting version with DA240 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and temperatures up to 120°C....

    Code: VL521B-080DA
    Ball valve VL521B with single-acting drive - DN80
    47 200 Kč –100 %
    Ball valve VL521B with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521B with clearance DN80. Single-acting version with SR240 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and temperatures up to 120°C....

    Code: VL521B-080SR
    K806 Double Actuator Ball Valve - 3"
    94 853 Kč –100 %
    K806 Double Actuator Ball Valve - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G3", clearance DN80. Double-acting version with DA240 drive made of stainless steel 1.4408. Designed for pressures up to 68 bar and...

    Code: K806T-30DA
    VL521T Double Actuator Ball Valve - 3"
    41 651 Kč –100 %
    VL521T Double Actuator Ball Valve - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G 3", clearance DN80. Double-acting version with DA240 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-30DA
    Knife gate valve L20ELEST - DN80
    129 052 Kč –100 %
    Knife gate valve L20ELEST - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST3 with DN80 clearance are used for closing pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST3-080
    Ball valve VL140F with double-acting drive - DN80
    42 998 Kč –100 %
    Ball valve VL140F with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    VL140F intermediate flange ball valves with DN80 clearance. Double-acting version with DA120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

    Code: VL140F-080DA
    Ball valve VL140F with single-acting drive - DN80
    49 966 Kč –100 %
    Ball valve VL140F with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    VL140F intermediate flange ball valves with DN80 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

    Code: VL140F-080SR
    Ball valve VL521T - 3"
    34 788 Kč –100 %
    Ball valve VL521T - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valve for automation VL521T with 3" female thread in DN80. Threaded brass ball valves designed for automation with pneumatic or electric actuator. Three-piece direct design...

    Code: VL521T-30
    Ball valve 02TTT with single-acting drive - DN80
    39 352 Kč –100 %
    Ball valve 02TTT with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves 02TTT with DN80 clearance. Single-acting version with SR180 drive made of grey cast iron. Designed for pressures of 16 bar and temperatures up to 200°C....

    Code: 02TTT-16-080SR
    Ball valve VL521B - DN80
    34 788 Kč –100 %
    Ball valve VL521B - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valve for automation VL521B with DN80 head. Brass ball valves with sleeve designed for automation by means of pneumatic or electric actuator. Three-piece direct design for...

    Code: VL521B-080
    Ball valve VL851 with single-acting drive - DN80
    61 005 Kč –100 %
    Ball valve VL851 with single-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves VL851 with DN80 clearance. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...

    Code: VL851-080SR
    Three-way tap 84TTT - DN 80, T drilling
    137 690 Kč –100 %
    Three-way tap 84TTT - DN 80, T drilling
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN80 clearance. Single-acting version with SR480 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40T-080SR
    VL521T Single Actuator Ball Valve - 3"
    46 936 Kč –100 %
    VL521T Single Actuator Ball Valve - 3"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G 3", clearance DN80. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-30SR
    Ball valve 04TTT with double-acting drive - DN80
    40 890 Kč –100 %
    Ball valve 04TTT with double-acting drive - DN80
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves 04TTT with DN80 clearance. Double-acting version with DA240 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....

    Code: 04TTT-40-080DA
    Up
    More products