Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Fittings and faucets

    Ball valves and fittings

    In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

    #ShowMore#

    Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

    Distribution of fittings according to construction

    How to choose a fitting?

    Determining the correct fitting size

    If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

    Choosing the right material

    Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

    Determination of the working pressure and volume of the medium

    Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

    Later maintenance of the fitting is important

    Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

    Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

    Selection of faucet according to design

    Bestsellers

    Ball valve 25 bar internal and external thread - 1/2"
    273 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/2"
    Stock (132 pcs)
    Code: BAA-12
    Was: 273 Kč  (–4 %)
    260 Kč
    (215 Kč excl. VAT)
    Ball valve for air 25 bar - 1/2"
    253 Kč –5 %
    Ball valve for air 25 bar - 1/2"
    Stock (61 pcs)
    Code: BA-12
    Was: 253 Kč  (–5 %)
    240 Kč
    (198 Kč excl. VAT)
    Hex ball valves internal and external thread - 1/4"
    121 Kč –4 %
    Hex ball valves internal and external thread - 1/4"
    Stock (>1000 pcs)
    Code: BMA-14
    Was: 121 Kč  (–4 %)
    115 Kč
    (95 Kč excl. VAT)
    Hexagonal ball valves internal and external thread - 1/2"
    150 Kč –4 %
    Hexagonal ball valves internal and external thread - 1/2"
    Stock (>1000 pcs)
    Code: BMA-12
    Was: 150 Kč  (–4 %)
    143 Kč
    (118 Kč excl. VAT)
    Thread filters ART44 1/2"
    154 Kč –5 %
    Thread filters ART44 1/2"
    Stock (20 pcs)
    Code: ART44-12
    Was: 154 Kč  (–5 %)
    146 Kč
    (121 Kč excl. VAT)
    Hex ball valves internal and external thread - 3/8"
    110 Kč –4 %
    Hex ball valves internal and external thread - 3/8"
    Stock (>1000 pcs)
    Code: BMA-38
    Was: 110 Kč  (–4 %)
    105 Kč
    (87 Kč excl. VAT)
    Gate valves ART34 - 3/4"
    346 Kč –5 %
    Gate valves ART34 - 3/4"
    Stock (4 pcs)
    Code: ART34-34
    Was: 346 Kč  (–5 %)
    328 Kč
    (271 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 3/4"
    403 Kč –4 %
    Ball valve 25 bar internal and external thread - 3/4"
    Stock (382 pcs)
    Code: BAA-34
    Was: 403 Kč  (–4 %)
    383 Kč
    (317 Kč excl. VAT)
    ART130E Check Valves - 1 1/4"
    683 Kč –4 %
    ART130E Check Valves - 1 1/4"
    Stock (1 pcs)
    Code: ART130E-54
    Was: 683 Kč  (–4 %)
    649 Kč
    (536 Kč excl. VAT)
    Hex Ball Valves - 1/2"
    128 Kč –4 %
    Hex Ball Valves - 1/2"
    Stock (>1000 pcs)
    Code: BM-12
    Was: 128 Kč  (–4 %)
    122 Kč
    (101 Kč excl. VAT)
    Show more products
    71 items total
    Ball valve K809W - DN65
    Tip
    19 237 Kč –99 %
    Ball valve K809W - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with DN65 clearance. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel, suitable for contact with...

    Code: K809W-065
    Three-way cock 86TTT - DN 65, drilling T
    128 086 Kč –100 %
    Three-way cock 86TTT - DN 65, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN65 clearance. Double-acting version with DA360 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-16T-065DA
    Three-way tap 84TTT - DN 65, drilling T
    93 594 Kč –100 %
    Three-way tap 84TTT - DN 65, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN65 clearance. Double-acting version with DA360 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40T-065DA
    Check valves ZKC DN65
    2 006 Kč –99 %
    Check valves ZKC DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The ZKC check valves for inter-flange connections with a clearance of DN 65 ensure the passage of the medium in one direction. Maximum flow velocity 3 m/s. Made of carbon steel,...

    Code: ZKC-065
    Thread filters ART44 2 1/2"
    3 024 Kč –4 %
    Thread filters ART44 2 1/2"
    up to 14 days
    2 374 Kč excl. VAT
    2 873 Kč / pcs

    Threaded filters ART44 with G2 1/2" connection thread for basic media filtration. Line clearance DN 65, working pressure 10 bar. Sloped strainer for quick change without...

    Code: ART44-25
    Shut-off valves UVC - DN65
    6 749 Kč –2 %
    Shut-off valves UVC - DN65
    up to 14 days
    5 466 Kč excl. VAT
    6 614 Kč / pcs

    Shut-off valves for continuous shut-off of pipelines for media up to +450°C. Clearance DN 65, manual operation by handwheel. Made of steel 1.0619, graphite gasket.

    Code: UVC-065
    K806 Double Actuator Ball Valve - 2 1/2"
    65 207 Kč –100 %
    K806 Double Actuator Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G2 1/2", clearance DN65. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 100 bar and...

    Code: K806T-25DA
    Ball valve K806 with double-acting drive - DN65
    65 207 Kč –100 %
    Ball valve K806 with double-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN65 clearance. Double-acting version with DA180 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and temperatures up to 250°C....

    Code: K806W-065DA
    Ball valve K806 with single-acting drive - DN65
    73 962 Kč –100 %
    Ball valve K806 with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN65 clearance. Double-acting version with SR180 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and temperatures up to 250°C....

    Code: K806W-065SR
    K806 Single Actuator Ball Valve - 2 1/2"
    73 962 Kč –100 %
    K806 Single Actuator Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G2 1/2" DN65. Single-acting version with SR180 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and temperatures...

    Code: K806T-25SR
    PFC flange filters - DN65
    6 629 Kč –2 %
    PFC flange filters - DN65
    up to 14 days
    5 369 Kč excl. VAT
    6 496 Kč / pcs

    PFC flange filters for basic media filtration. Flanges according to EN 1092-1 type B. Line clearance DN 65, working pressure 40 bar. Sloped strainer for quick change without...

    Code: PFC-065
    Check valves ZKS DN65
    6 822 Kč –99 %
    Check valves ZKS DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Check valves ZKS for inter-flange connections with a clearance of DN 65 ensure the passage of the medium in one direction. Maximum flow velocity 3 m/s. Made of stainless steel...

    Code: ZKS-065
    Flange filters PFG - DN65
    2 623 Kč –1 %
    Flange filters PFG - DN65
    up to 14 days
    2 125 Kč excl. VAT
    2 571 Kč / pcs

    PFG flange filters for basic media filtration. Flanges according to EN 1092-1 type B. Line clearance DN 65, working pressure 16 bar. Sloped strainer for quick change without...

    Code: PFG-065
    Gate valves ART34 - 2 1/2"
    2 886 Kč –4 %
    Gate valves ART34 - 2 1/2"
    up to 14 days
    2 266 Kč excl. VAT
    2 742 Kč / pcs

    Gate valves ART34 with connection thread G2 1/2" with handwheel control. Clearance DN 65, body length 64 and height 175.

    Code: ART34-25
    Lockable Stainless Steel Faucet - 2 1/2"
    12 165 Kč –5 %
    Lockable Stainless Steel Faucet - 2 1/2"
    up to 14 days
    9 551 Kč excl. VAT
    11 557 Kč / pcs

    Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...

    Code: KH25ES
    Two-piece stainless steel faucet - 2 1/2"
    Tip
    6 443 Kč –5 %
    Two-piece stainless steel faucet - 2 1/2"
    up to 14 days
    5 058 Kč excl. VAT
    6 120 Kč / pcs

    Stainless steel tap for industrial, food and chemical applications with internal threads G 2 1/2". It is a two-piece design of the tap with smaller dimensions than those...

    Code: 009V-065-316
    Ball valve 04TTT with single-acting drive - DN65
    40 202 Kč –100 %
    Ball valve 04TTT with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves 04TTT with DN65 clearance. Single-acting version with SR180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 200°C....

    Code: 04TTT-40-065SR
    Ball valve VL521B with double-acting drive - DN65
    30 656 Kč –100 %
    Ball valve VL521B with double-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521B with clearance DN65. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and temperatures up to 120°C....

    Code: VL521B-065DA
    Ball valve VL521B with single-acting drive - DN65
    35 839 Kč –100 %
    Ball valve VL521B with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521B with clearance DN65. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and temperatures up to 120°C....

    Code: VL521B-065SR
    Knife gate valve L20ELEST - DN65
    113 226 Kč –100 %
    Knife gate valve L20ELEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN65 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-065
    Three-way tap 84TTT - DN 65, drilling L
    93 594 Kč –100 %
    Three-way tap 84TTT - DN 65, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN65 clearance. Double-acting version with DA360 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-065DA
    VL521T Double Actuator Ball Valve - 2 1/2"
    30 656 Kč –100 %
    VL521T Double Actuator Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G 2 1/2", clearance DN65. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-25DA
    VL521T Single Actuator Ball Valve - 2 1/2"
    35 839 Kč –100 %
    VL521T Single Actuator Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G 2 1/2", clearance DN65. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-25SR
    Ball valve VL140F with single-acting drive - DN65
    41 285 Kč –100 %
    Ball valve VL140F with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    VL140F intermediate flange ball valves with DN65 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

    Code: VL140F-065SR
    Hose valves QVF - DN65
    18 277 Kč –3 %
    Hose valves QVF - DN65
    up to 14 days
    14 652 Kč excl. VAT
    17 729 Kč / pcs

    QV hose valves with flanged connection with DN 65 clearance. Connection via flanges according to EN1092. Made of aluminium with NR cuff for temperatures up to +80°C.

    Code: QVF-065
    K809T Ball Valve - 2 1/2"
    19 237 Kč –99 %
    K809T Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with internal threads G2 1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel,...

    Code: K809T-25
    Ball valve 06TTT with single-acting drive - DN65
    54 681 Kč –100 %
    Ball valve 06TTT with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    06TTT flanged ball valves with DN65 clearance. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 06TTT-40-065SR
    Ball valve K806W - DN65
    52 631 Kč –100 %
    Ball valve K806W - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809W with DN65 clearance. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel 1.4408, suitable for contact with...

    Code: K806W-065
    Ball valve VL140F with double-acting drive - DN65
    33 906 Kč –100 %
    Ball valve VL140F with double-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    VL140F intermediate flange ball valves with DN65 clearance. Double-acting version with DA90 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and...

    Code: VL140F-065DA
    Ball valve VL851 with single-acting drive - DN65
    46 306 Kč –100 %
    Ball valve VL851 with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Flanged ball valves VL851 with DN65 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...

    Code: VL851-065SR
    V101 elektropohon armatury kulovy kohout
    from 34 272 Kč –100 %
    Ball valve with electric drive V101 - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs
    Detail

    Straight ball valve V101 with 2 1/2" female pipe threads and electric actuator VCQ008. For sealing of pipelines of non-aggressive media up to 25 bar in industry.

    Code: V101-25VCQ24
    K806T Ball Valve - 2 1/2"
    52 631 Kč –100 %
    K806T Ball Valve - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with internal threads G2 1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel...

    Code: K806T-25
    Knife gate valve L20ELEST - DN65
    124 967 Kč –100 %
    Knife gate valve L20ELEST - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The L20ELEST3 foot gate valves with DN65 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST3-065
    Knife gate valve L20VEST1 - DN65
    13 293 Kč –99 %
    Knife gate valve L20VEST1 - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20VEST1 with DN65 clearance are used to close pipes with dirty and abrasive media. Inter-flange design operated by handwheel. Made of cast iron GG25, blade...

    Code: L20VEST1-065
    Three-way tap 84TTT - DN 65, drilling L
    108 644 Kč –100 %
    Three-way tap 84TTT - DN 65, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN65 clearance. Single-acting version with SR360 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-065SR
    Shut-off valves UVS - DN65
    118 307 Kč –100 %
    Shut-off valves UVS - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    UVS shut-off valves for continuous pipe shut-off. Clearance DN 65, manual operation by handwheel. Made of stainless steel 1.4408, graphite gasket.

    Code: UVS-065
    Ball Valve VL001T - 2 1/2"
    14 611 Kč –99 %
    Ball Valve VL001T - 2 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL001T with female pipe thread G2 1/2". Operated by lever and disassembled into three parts. The stainless steel material makes the tap suitable for contact with...

    Code: VL001T-25
    Shut-off valves UVL - DN65
    5 269 Kč –1 %
    Shut-off valves UVL - DN65
    up to 14 days
    4 268 Kč excl. VAT
    5 164 Kč / pcs

    Shut-off valves for continuous pipe shut-off. Clearance DN 65, manual operation by handwheel. Made of cast iron GG25, graphite packing.

    Code: UVL-065
    Ball valve 06TTT with single-acting drive - DN65
    49 688 Kč –100 %
    Ball valve 06TTT with single-acting drive - DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    06TTT flanged ball valves with DN65 clearance. Single-acting version with SR120 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...

    Code: 06TTT-16-065SR
    Ball valve Pekos 02TTT DN65
    13 586 Kč –99 %
    Ball valve Pekos 02TTT DN65
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve Pekos 02TTT DN65 with flanges. Construction length according to EN 558-1. Made of grey cast iron GG25. Designed for non-aggressive or moderately aggressive media in...

    Code: 02TTT-16-065
    Up
    More products