Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Fittings and faucets

    Ball valves and fittings

    In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

    #ShowMore#

    Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

    Distribution of fittings according to construction

    How to choose a fitting?

    Determining the correct fitting size

    If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

    Choosing the right material

    Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

    Determination of the working pressure and volume of the medium

    Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

    Later maintenance of the fitting is important

    Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

    Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

    Selection of faucet according to design

    Bestsellers

    Hex ball valves internal and external thread - 1/4"
    121 Kč –4 %
    Hex ball valves internal and external thread - 1/4"
    Stock (>1000 pcs)
    Code: BMA-14
    Was: 121 Kč  (–4 %)
    115 Kč
    (95 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/2"
    273 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/2"
    Stock (357 pcs)
    Code: BAA-12
    Was: 273 Kč  (–4 %)
    260 Kč
    (215 Kč excl. VAT)
    Hexagonal ball valves internal and external thread - 1/2"
    150 Kč –4 %
    Hexagonal ball valves internal and external thread - 1/2"
    Stock (>1000 pcs)
    Code: BMA-12
    Was: 150 Kč  (–4 %)
    143 Kč
    (118 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/4"
    382 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/4"
    Stock (11 pcs)
    Code: ART0802-14
    Was: 382 Kč  (–4 %)
    363 Kč
    (300 Kč excl. VAT)
    Thread filters ART44 1/2"
    154 Kč –5 %
    Thread filters ART44 1/2"
    Stock (17 pcs)
    Code: ART44-12
    Was: 154 Kč  (–5 %)
    146 Kč
    (121 Kč excl. VAT)
    Hex ball valves internal and external thread - 3/8"
    110 Kč –4 %
    Hex ball valves internal and external thread - 3/8"
    Stock (>1000 pcs)
    Code: BMA-38
    Was: 110 Kč  (–4 %)
    105 Kč
    (87 Kč excl. VAT)
    Ball valve for air 25 bar - 1/2"
    253 Kč –5 %
    Ball valve for air 25 bar - 1/2"
    Stock (175 pcs)
    Code: BA-12
    Was: 253 Kč  (–5 %)
    240 Kč
    (198 Kč excl. VAT)
    Ball valve for air 25 bar - 1/4"
    195 Kč –5 %
    Ball valve for air 25 bar - 1/4"
    Stock (828 pcs)
    Code: BA-14
    Was: 195 Kč  (–5 %)
    185 Kč
    (153 Kč excl. VAT)
    Ball valve for air 25 bar - 3/4"
    445 Kč –4 %
    Ball valve for air 25 bar - 3/4"
    Stock (518 pcs)
    Code: BA-34
    Was: 445 Kč  (–4 %)
    423 Kč
    (350 Kč excl. VAT)
    1/2" Air Ball Wing Valve
    390 Kč –4 %
    1/2" Air Ball Wing Valve
    Stock (5 pcs)
    Code: ART15SMV-12B
    Was: 390 Kč  (–4 %)
    371 Kč
    (307 Kč excl. VAT)
    Show more products
    102 items total
    Ball valve for air 25 bar - 2"
    Tip
    2 718 Kč –5 %
    Ball valve for air 25 bar - 2"
    Stock (323 pcs)
    2 134 Kč excl. VAT
    2 582 Kč / pcs

    Ball valves for compressed air up to 25 bar with full flow, lever operated in blue. Body, threaded part and ball made of MS 58 brass, PTFE sealing ring, Viton o-ring. Designed...

    Code: BA-20
    3-Way Stainless Steel T Ball Valve - 2"
    Tip
    7 041 Kč –5 %
    3-Way Stainless Steel T Ball Valve - 2"
    Stock (2 pcs)
    5 528 Kč excl. VAT
    6 689 Kč / pcs

    Stainless steel ball valves with internal threads G 2" in three-way lever-operated design. T ball drilling. Designed for aggressive media especially in the chemical and food...

    Code: V204T-050-316
    Ball valve internal and external thread - 2"
    1 539 Kč –5 %
    Ball valve internal and external thread - 2"
    Stock (953 pcs)
    1 208 Kč excl. VAT
    1 462 Kč / pcs

    Ball valves for full flow water, lever operated up to 25 bar. Body in nickel-plated brass MS58, control lever in red. Sealing the shaft with a packing. Designed especially for...

    Code: BWA-20
    Female Threaded Ball Valve - 2"
    Tip
    1 861 Kč –5 %
    Female Threaded Ball Valve - 2"
    Stock (817 pcs)
    1 461 Kč excl. VAT
    1 768 Kč / pcs

    Ball valves for full flow water, lever operated up to 25 bar. Nickel-plated brass MS58 body, control lever in red. Sealing the shaft with a packing. Designed especially for...

    Code: BW-20
    Stainless Steel Ball Valve - 2"
    11 219 Kč –5 %
    Stainless Steel Ball Valve - 2"
    Stock (2 pcs)
    8 808 Kč excl. VAT
    10 658 Kč / pcs

    Stainless steel ball valve for food industry in 2" internal thread. Maximum inlet medium pressure up to 40 bar. Robust flangeless ball valves with AISI 316 stainless steel body....

    Code: ART2601-20
    Three way ball valve T - 2"
    12 472 Kč –5 %
    Three way ball valve T - 2"
    Stock (1 pcs)
    9 793 Kč excl. VAT
    11 849 Kč / pcs

    Three-way ball valves T-drilling. Robust ball valves made of nickel-plated brass. Body - nickel plated brass MS58, ball - chrome plated brass, ball and spindle seals - PTFE. For...

    Code: ART3VT-20
    Lockable stainless steel faucet - 2"
    6 230 Kč –4 %
    Lockable stainless steel faucet - 2"
    Stock (2 pcs)
    4 892 Kč excl. VAT
    5 919 Kč / pcs

    Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...

    Code: KH20ES
    RV600 Check Valves - 2"
    9 999 Kč –99 %
    RV600 Check Valves - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The RV600 check valves with G2" threaded connection ensure the flow of the medium in one direction. Pipe clearance DN50. Opening pressure at least 0.8 bar. Made of stainless...

    Code: RV600-20
    Shut-off valves UVC - DN50
    4 874 Kč –2 %
    Shut-off valves UVC - DN50
    up to 14 days
    3 947 Kč excl. VAT
    4 776 Kč / pcs

    Shut-off valves for continuous shut-off of pipelines for media up to +450°C. Clearance DN 50, manual operation by handwheel. Made of steel 1.0619, graphite gasket.

    Code: UVC-050
    Ball valve VL001B - DN50
    Tip
    7 598 Kč –99 %
    Ball valve VL001B - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL001B with clearance DN50 with marker. Operated by lever and disassembled into three parts. The stainless steel material makes the tap suitable for contact with...

    Code: VL001B-050
    Three-way stainless steel ball valve L - 2"
    Tip
    23 966 Kč –100 %
    Three-way stainless steel ball valve L - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Stainless steel ball valve with 2" female threads in three-way design with ball drilling in "L" and lever operation. Designed for aggressive media especially in the chemical...

    Code: VL321L-20
    Stainless Steel Straight Ball Valve - 2"
    Tip
    6 829 Kč –99 %
    Stainless Steel Straight Ball Valve - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Stainless steel ball valves with 2" female threads operated by hand lever. Designed especially for aggressive media in the chemical and food industry with a maximum working...

    Code: VL451-20
    Three-way cock 86TTT - DN 50, drilling L
    100 240 Kč –100 %
    Three-way cock 86TTT - DN 50, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN50 clearance. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-40L-050SR
    Three-way cock 86TTT - DN 50, drilling L
    91 486 Kč –100 %
    Three-way cock 86TTT - DN 50, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN50 clearance. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-40L-050DA
    Three-way tap 84TTT - DN 50, drilling L
    60 405 Kč –100 %
    Three-way tap 84TTT - DN 50, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN50 clearance. Double-acting version with DA180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-050DA
    Three-way tap 84TTT - DN 50, drilling T
    60 405 Kč –100 %
    Three-way tap 84TTT - DN 50, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN50 clearance. Double-acting version with DA180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40T-050DA
    Three-way cock 86TTT - DN 50, drilling T
    91 486 Kč –100 %
    Three-way cock 86TTT - DN 50, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 86TTT with DN50 clearance. Double-acting version with DA180 drive made of stainless steel 1.4408. Designed for pressures of 40 bar and temperatures up to...

    Code: 86TTT-40T-050DA
    Three-way tap 84TTT - DN 50, drilling L
    69 160 Kč –100 %
    Three-way tap 84TTT - DN 50, drilling L
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN50 clearance. Single-acting version with SR180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40L-050SR
    Three-way tap 84TTT - DN 50, drilling T
    69 160 Kč –100 %
    Three-way tap 84TTT - DN 50, drilling T
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way stopcock 84TTT with DN50 clearance. Single-acting version with SR180 drive made of 1.0619 steel. Designed for pressures of 40 bar and temperatures up to 180°C....

    Code: 84TTT-40T-050SR
    Ball valve VL140F - DN50
    16 133 Kč –99 %
    Ball valve VL140F - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL140F DN50 with flanges according to DIN 2633 and DIN2635. The flange complies with the ISO5211 standard and automation options. The stainless steel material makes...

    Code: VL140F-050
    Knife gate valve L20NEST - DN50
    18 490 Kč –99 %
    Knife gate valve L20NEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST1 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of cast iron...

    Code: L20NEST1-050
    Knife gate valve L20ELEST - DN50
    112 802 Kč –100 %
    Knife gate valve L20ELEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20ELEST1 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by an electric drive. Operating...

    Code: L20ELEST1-050
    Ball valve VL001T - 2"
    7 598 Kč –99 %
    Ball valve VL001T - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL001T with female pipe thread G2". Operated by lever and disassembled into three parts. The stainless steel material makes the tap suitable for contact with...

    Code: VL001T-20
    PFC flange filters - DN50
    4 301 Kč –2 %
    PFC flange filters - DN50
    up to 14 days
    3 483 Kč excl. VAT
    4 215 Kč / pcs

    PFC flange filters for basic media filtration. Flanges according to EN 1092-1 type B. Line clearance DN 50, working pressure 40 bar. Sloped strainer for quick change without...

    Code: PFC-050
    Knife gate valve L20NEST - DN50
    30 349 Kč –100 %
    Knife gate valve L20NEST - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Foot gate valves L20NEST3 with DN50 clearance are used to close pipes with dirty and abrasive media. Intermediate flange design controlled by pneumatic drive. Made of 1.4408...

    Code: L20NEST3-050
    Flange filters PFG - DN50
    1 912 Kč –2 %
    Flange filters PFG - DN50
    up to 14 days
    1 548 Kč excl. VAT
    1 873 Kč / pcs

    PFG flange filters for basic media filtration. Flanges according to EN 1092-1 type B. Line clearance DN 50, working pressure 16 bar. Sloped strainer for quick change without...

    Code: PFG-050
    Ball valve degreased - 2"
    6 168 Kč –5 %
    Ball valve degreased - 2"
    up to 14 days
    4 842 Kč excl. VAT
    5 859 Kč / pcs

    Full-flow ball valves with stopcock. The entire ballcock is degreased with no sign of silicone. For various industrial applications with requirements for degreasing, for example...

    Code: ART0101-20
    Ball valve K809W - DN50
    Tip
    11 331 Kč –99 %
    Ball valve K809W - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with DN50 clearance. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of carbon steel, suitable for contact with...

    Code: K809W-050
    Thread filters ART44 2"
    1 465 Kč –4 %
    Thread filters ART44 2"
    up to 14 days
    1 150 Kč excl. VAT
    1 392 Kč / pcs

    ART44 threaded filters with G2" connection thread for basic media filtration. Line clearance DN 50, working pressure 10 bar. Sloped strainer for quick change without dismantling...

    Code: ART44-20
    Check valves ZKC - DN50
    1 728 Kč –99 %
    Check valves ZKC - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Check valves ZKC for inter-flange connection with clearance DN 50, ensure the passage of the medium in one direction. Maximum flow velocity 3 m/s. Made of carbon steel, EPDM...

    Code: ZKC-050
    Gas ball valve internal threads - 2"
    2 898 Kč –5 %
    Gas ball valve internal threads - 2"
    up to 14 days
    2 275 Kč excl. VAT
    2 753 Kč / pcs

    Gas ball valves for gases of class 1, 2 or 3 according to EN 437. Designed especially for gas applications, control by hand lever in 2" female threaded version.

    Code: ART4271-20
    Gas ball valve female / male thread - 2"
    3 032 Kč –5 %
    Gas ball valve female / male thread - 2"
    up to 14 days
    2 380 Kč excl. VAT
    2 880 Kč / pcs

    Gas ball valves for gases of class 1, 2 or 3 according to EN 437. Designed especially for gas applications, control via a swing handle in 2" female threaded version.

    Code: ART4272-20
    V101 elektropohon armatury kulovy kohout
    from 22 326 Kč –100 %
    Ball valve with electric drive V101 - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs
    Detail

    Straight ball valve V101 with 2" female pipe threads and electric actuator VCQ004. For sealing of pipelines of non-aggressive media up to 32 bar in industry.

    Code: V101-20VCQ24
    Threaded filters YS800 - 2"
    8 301 Kč –99 %
    Threaded filters YS800 - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    YS800 threaded filters with G2" connection thread for basic media filtration. Line clearance DN 50, working pressure 40 bar. Sloped strainer for quick change without dismantling...

    Code: YS800-20
    Ball valve K806T - 2"
    29 207 Kč –100 %
    Ball valve K806T - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with internal threads G2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel...

    Code: K806T-20
    Ball valve K806W - DN50
    29 207 Kč –100 %
    Ball valve K806W - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809W with DN50 clearance. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel 1.4408, suitable for contact with...

    Code: K806W-050
    Ball valve VL851 with double-acting drive - DN50
    32 559 Kč –100 %
    Ball valve VL851 with double-acting drive - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    VL851 flanged ball valves with DN50 clearance. Double-acting version with DA120 drive made of stainless steel 1.4408. Designed for pressures of 16 bar and temperatures up to...

    Code: VL851-050DA
    Ball valve K806 with double-acting drive - DN50
    40 348 Kč –100 %
    Ball valve K806 with double-acting drive - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN50 clearance. Double-acting version with DA180 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and temperatures up to 250°C....

    Code: K806W-050DA
    Ball valve K806 with single-acting drive - DN50
    45 531 Kč –100 %
    Ball valve K806 with single-acting drive - DN50
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with DN50 clearance. Double-acting version with SR180 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and temperatures up to 250°C....

    Code: K806W-050SR
    K806 Single Actuator Ball Valve - 2"
    45 531 Kč –100 %
    K806 Single Actuator Ball Valve - 2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G2", clearance DN50. Single-acting version with SR120 drive made of stainless steel DIN 1,4408. Designed for pressures of 100 bar and...

    Code: K806T-20SR
    Up
    More products