Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Fittings and faucets

    Ball valves and fittings

    In this category you will find all kinds of taps and other fittings you will need for regulating and closing compressed air, water, gases and other media. We also have pneumatic and electrically operated versions of the taps, which can be used when compressed air or electricity is available near the application site. The individual subcategories will easily guide you to your correct product - and you can also use the product filter. For more information on taps and valves, click on continue.

    #ShowMore#

    Fittings, under which you can think of taps with different types of control, seat valves and gate valves, represent an incredibly broad and wide category of products for controlling and closing different types of media, not only compressed air. Making the right choice is easier when you know exactly which solution is right for your application. For example, our breakdown can help you:

    Distribution of fittings according to construction

    How to choose a fitting?

    Determining the correct fitting size

    If you get the wrong size fitting, you will definitely have problems with its operation and it will also not match the performance. An oversized or undersized valve can choke the flow of the medium passing inside or increase the cost of operating the entire system due to inefficiency. Standard fitting sizes can range from ½" to 6". On our e-shop you have the advantage that many parameters can be filtered - brightness, connection, thread, etc. This will make your choice easier.

    Choosing the right material

    Fittings are most commonly made of stainless steel, carbon steel, common steel, brass and cast iron. Beware if you work with aggressive and corrosive media. A cheap steel tap won't do then. Fortunately, we do not lack any of the variants - you can always find the specification in the product parameters. For example, stainless steel taps can look like this, special taps for flammable gases made of brass like this and cast iron taps like this.

    Determination of the working pressure and volume of the medium

    Each application may have different flow requirements and operate at different pressures. Determine the volume of air, gas or liquid that will pass through the valve. The working pressure also varies according to the application for ball valves and other fittings. If you do not know what to do in this respect, please do not hesitate to contact us.

    Later maintenance of the fitting is important

    Fittings generally require relatively low maintenance. However, cheap solutions can have their downsides due to saving money in the wrong places - typically on sealing elements. Then maintenance is really important, otherwise the fitting may stop sealing properly. Teflon seals can improve the quality of fittings. Choosing a quality tap or valve also ensures that you get a long-lasting product that requires less maintenance and provides optimal performance.

    Please take the above parts into consideration when making your selection, so that the fitting will serve you excellently for a long time. And if you already have a clearer understanding of the selection, you can try this signpost in addition to the subcategories on the e-shop:

    Selection of faucet according to design

    Bestsellers

    Hex ball valves internal and external thread - 1/4"
    121 Kč –4 %
    Hex ball valves internal and external thread - 1/4"
    Stock (>1000 pcs)
    Code: BMA-14
    Was: 121 Kč  (–4 %)
    115 Kč
    (95 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/2"
    273 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/2"
    Stock (357 pcs)
    Code: BAA-12
    Was: 273 Kč  (–4 %)
    260 Kč
    (215 Kč excl. VAT)
    Hexagonal ball valves internal and external thread - 1/2"
    150 Kč –4 %
    Hexagonal ball valves internal and external thread - 1/2"
    Stock (>1000 pcs)
    Code: BMA-12
    Was: 150 Kč  (–4 %)
    143 Kč
    (118 Kč excl. VAT)
    Ball valve 25 bar internal and external thread - 1/4"
    382 Kč –4 %
    Ball valve 25 bar internal and external thread - 1/4"
    Stock (11 pcs)
    Code: ART0802-14
    Was: 382 Kč  (–4 %)
    363 Kč
    (300 Kč excl. VAT)
    Thread filters ART44 1/2"
    154 Kč –5 %
    Thread filters ART44 1/2"
    Stock (17 pcs)
    Code: ART44-12
    Was: 154 Kč  (–5 %)
    146 Kč
    (121 Kč excl. VAT)
    Hex ball valves internal and external thread - 3/8"
    110 Kč –4 %
    Hex ball valves internal and external thread - 3/8"
    Stock (>1000 pcs)
    Code: BMA-38
    Was: 110 Kč  (–4 %)
    105 Kč
    (87 Kč excl. VAT)
    Ball valve for air 25 bar - 1/2"
    253 Kč –5 %
    Ball valve for air 25 bar - 1/2"
    Stock (175 pcs)
    Code: BA-12
    Was: 253 Kč  (–5 %)
    240 Kč
    (198 Kč excl. VAT)
    Ball valve for air 25 bar - 1/4"
    195 Kč –5 %
    Ball valve for air 25 bar - 1/4"
    Stock (828 pcs)
    Code: BA-14
    Was: 195 Kč  (–5 %)
    185 Kč
    (153 Kč excl. VAT)
    Ball valve for air 25 bar - 3/4"
    445 Kč –4 %
    Ball valve for air 25 bar - 3/4"
    Stock (518 pcs)
    Code: BA-34
    Was: 445 Kč  (–4 %)
    423 Kč
    (350 Kč excl. VAT)
    1/2" Air Ball Wing Valve
    390 Kč –4 %
    1/2" Air Ball Wing Valve
    Stock (5 pcs)
    Code: ART15SMV-12B
    Was: 390 Kč  (–4 %)
    371 Kč
    (307 Kč excl. VAT)
    Show more products
    52 items total
    Ball valve 25 bar internal and external thread - 1 1/2"
    Tip
    2 011 Kč –4 %
    Ball valve 25 bar internal and external thread - 1 1/2"
    Stock (7 pcs)
    1 579 Kč excl. VAT
    1 911 Kč / pcs

    Ball valves PN 25 for compressed air. Full flow ball valves, lever operated in blue. Body, threaded part and ball made of MS 58 brass, PTFE sealing ring, Viton o-ring. Designed...

    Code: ART0802-15
    Ball valve for air 25 bar - 1 1/2"
    Tip
    1 707 Kč –5 %
    Ball valve for air 25 bar - 1 1/2"
    Stock (180 pcs)
    1 340 Kč excl. VAT
    1 621 Kč / pcs

    Ball valves for compressed air up to 25 bar with full flow, lever operated in blue. Body, threaded part and ball made of MS 58 brass, PTFE sealing ring, Viton o-ring. Designed...

    Code: BA-15
    Female Threaded Ball Valve - 1 1/2"
    Tip
    1 256 Kč –5 %
    Female Threaded Ball Valve - 1 1/2"
    Stock (238 pcs)
    986 Kč excl. VAT
    1 193 Kč / pcs

    Ball valves for full flow water, lever operated up to 25 bar. Nickel-plated brass MS58 body, control lever in red. Sealing the shaft with a packing. Designed especially for...

    Code: BW-15
    Ball valve internal and external thread - 1 1/2"
    825 Kč –4 %
    Ball valve internal and external thread - 1 1/2"
    Stock (>1000 pcs)
    648 Kč excl. VAT
    784 Kč / pcs

    Ball valves for full flow water, lever operated up to 25 bar. Body in nickel-plated brass MS58, control lever in red. Sealing the shaft with a packing. Designed especially for...

    Code: BWA-15
    Lockable Stainless Steel Faucet - 1 1/2"
    3 669 Kč –4 %
    Lockable Stainless Steel Faucet - 1 1/2"
    Stock (2 pcs)
    2 881 Kč excl. VAT
    3 486 Kč / pcs

    Lockable fittings in stainless steel. Body made of stainless steel 1.4408, ball - stainless steel 1.4408, seal -PTFE. Designed for applications where it is necessary to secure...

    Code: KH15ES
    Check valves ART130E - 1 1/2"
    1 080 Kč –5 %
    Check valves ART130E - 1 1/2"
    Stock (1 pcs)
    848 Kč excl. VAT
    1 026 Kč / pcs

    Check valves ART130E for horizontal mounting with connection thread G1 1/2". Pipe clearance DN 40, body length 88, height 98. Made of brass.

    Code: ART130E-15
    Stainless Steel Flanged Faucet - 1 1/2"
    Sellout
    6 965 Kč –5 %
    Stainless Steel Flanged Faucet - 1 1/2"
    Stock (1 pcs)
    5 468 Kč excl. VAT
    6 616 Kč / pcs

    Stainless steel ball valve for food industry in 1 1/2" internal thread. Maximum inlet medium pressure up to 64 bar. Robust ball valves with flange for automation and AISI 316...

    Code: ART2501-15
    Ball valves V101 - 1 1/2"
    Tip
    4 573 Kč –99 %
    Ball valves V101 - 1 1/2"
    Stock (1 pcs)
    1 Kč excl. VAT
    1 Kč / pcs

    ball valve for automation V101 with 1 1/2" female thread in DN40. Threaded brass ball valves designed for automation with pneumatic or electric actuator. Direct design for...

    Code: V101-15
    V101 Double Actuator Ball Valve DA - 1 1/2"
    9 493 Kč –99 %
    V101 Double Actuator Ball Valve DA - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Direct ball valve V101 with 1 1/2" thread connection and pneumatic double-acting actuator DA30 operated by compressed air. Drive control pressure of at least 5.5 bar. For...

    Code: V101-15DA
    Thread filters ART44 1 1/2"
    862 Kč –4 %
    Thread filters ART44 1 1/2"
    up to 14 days
    677 Kč excl. VAT
    819 Kč / pcs

    Threaded filters ART44 with G1 1/2" connection thread for basic media filtration. Line clearance DN 40, working pressure 10 bar. Sloped strainer for quick change without...

    Code: ART44-15
    Three Way Stainless Steel Ball Valve L - 1 1/2"
    Tip
    13 205 Kč –99 %
    Three Way Stainless Steel Ball Valve L - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Stainless steel ball valve with internal threads 1 1/2" in three-way design with ball drilling to "L" and lever operation. Designed for aggressive media especially in the...

    Code: VL321L-15
    Stainless Steel Straight Ball Valve - 1 1/2"
    Tip
    5 133 Kč –99 %
    Stainless Steel Straight Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Stainless steel ball valves with 1 1/2" female threads operated by hand lever. Designed especially for aggressive media in the chemical and food industry with a maximum working...

    Code: VL451-15
    Ball Valve VL001T - 1 1/2"
    5 212 Kč –99 %
    Ball Valve VL001T - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL001T with female pipe thread G1 1/2". Operated by lever and disassembled into three parts. The stainless steel material makes the tap suitable for contact with...

    Code: VL001T-15
    K809 Double Actuator Ball Valve - 1 1/2"
    18 168 Kč –99 %
    K809 Double Actuator Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K809 with female thread G1 1/2", clearance DN40. Double-acting version with DA120 drive made of A350 LF2 carbon steel. Designed for pressures of 140 bar and...

    Code: K809T-15DA
    Needle valves VYCS - 1 1/2"
    30 993 Kč –100 %
    Needle valves VYCS - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Needle valves with G1 1/2" thread for gradual shut-off of high-pressure pipelines. Clearance DN 40, manual operation by handwheel. Made of stainless steel 1.4401, graphite gasket.

    Code: VYCS-15
    Three Way Ball Valve L - 1 1/2"
    6 345 Kč –5 %
    Three Way Ball Valve L - 1 1/2"
    up to 14 days
    4 981 Kč excl. VAT
    6 027 Kč / pcs

    Three-way ball valves L. Robust ball valves made of nickel-plated brass. Body - nickel plated brass MS58, ball - chrome plated brass, ball and spindle seals - PTFE. For taps or...

    Code: ART3VL-15
    Stainless steel two-piece faucet - 1 1/2"
    Tip
    2 714 Kč –9 %
    Stainless steel two-piece faucet - 1 1/2"
    up to 14 days
    2 019 Kč excl. VAT
    2 443 Kč / pcs

    Stainless steel tap for industrial, food and chemical applications with internal threads G 1 1/2". It is a two-piece design of the tap with smaller dimensions than those...

    Code: 009V-040-316
    Ball cock degreased - 1 1/2"
    3 871 Kč –5 %
    Ball cock degreased - 1 1/2"
    up to 14 days
    3 039 Kč excl. VAT
    3 677 Kč / pcs

    Full-flow ball valves with stopcock. The entire ballcock is degreased with no sign of silicone. For various industrial applications with requirements for degreasing, for example...

    Code: ART0101-15
    Gas ball valve female threads - 1 1/2"
    1 804 Kč –4 %
    Gas ball valve female threads - 1 1/2"
    up to 14 days
    1 417 Kč excl. VAT
    1 714 Kč / pcs

    Gas ball valves for gases of class 1, 2 or 3 according to EN 437. Designed especially for gas applications operated by a hand lever in 1 1/2" female threads.

    Code: ART4271-15
    Three-way ball valve V153 - 1 1/2"
    8 436 Kč –99 %
    Three-way ball valve V153 - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valves for automation V153 with 1 1/2" thread in DN40. Brass ball valves with internal threads designed for automation by means of pneumatic actuator or electric actuator....

    Code: V153-15
    Gas Ball Valve Female / Male Thread - 1 1/2"
    1 889 Kč –4 %
    Gas Ball Valve Female / Male Thread - 1 1/2"
    up to 14 days
    1 483 Kč excl. VAT
    1 795 Kč / pcs

    Gas ball valves for gases of class 1, 2 or 3 according to EN 437. Designed especially for gas applications operated by a swing handle in a 1 1/2" female threaded version.

    Code: ART4272-15
    V101 elektropohon armatury kulovy kohout
    from 20 540 Kč –100 %
    Ball valve with electric drive V101 - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs
    Detail

    Direct ball valve V101 with 1 1/2" female pipe threads and electric actuator VCQ004. For sealing of pipelines of non-aggressive media up to 40 bar in industry.

    Code: V101-15VCQ24
    Threaded Filters YS800 - 1 1/2"
    7 130 Kč –99 %
    Threaded Filters YS800 - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Threaded filters YS800 with G1 1/2" connection thread for basic media filtration. Line clearance DN 40, working pressure 40 bar. Sloped strainer for quick change without...

    Code: YS800-15
    K806T Ball Valve - 1 1/2"
    19 501 Kč –99 %
    K806T Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve K809T with internal threads G1 1/2" according to DIN ISO228. Lever-operated with ISO 5211 automation. Certification according to EN 10204-3.1. Made of stainless steel...

    Code: K806T-15
    K806 Single Actuator Ball Valve - 1 1/2"
    35 824 Kč –100 %
    K806 Single Actuator Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with internal thread G1 1/2" DN40. Single-acting version with SR120 drive made of stainless steel DIN 1,4408. Designed for pressures of 140 bar and temperatures...

    Code: K806T-15SR
    K806 Double Actuator Ball Valve - 1 1/2"
    29 119 Kč –100 %
    K806 Double Actuator Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valves K806 with female thread G1 1/2", clearance DN40. Double-acting version with DA120 drive made of stainless steel 1.4408. Designed for pressures of 140 bar and...

    Code: K806T-15DA
    VL521T Double Actuator Ball Valve - 1 1/2"
    14 450 Kč –99 %
    VL521T Double Actuator Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G1 1/2", clearance DN40. Double-acting version with DA90 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-15DA
    VL521T Single Actuator Ball Valve - 1 1/2"
    18 037 Kč –99 %
    VL521T Single Actuator Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Ball valve VL521T with female thread G 1 1/2", clearance DN40. Single-acting version with SR60 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...

    Code: VL521T-15SR
    VYCO Needle Valves - 1 1/2"
    12 590 Kč –99 %
    VYCO Needle Valves - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Needle valves with G1 1/2" thread for gradual shut-off of high-pressure pipelines. Clearance DN 40, manual operation by handwheel. Made of steel 1.1191, graphite gasket.

    Code: VYCO-15
    V153L Electric Three-Way Faucet - 1 1/2"
    from 15 797 Kč –99 %
    V153L Electric Three-Way Faucet - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs
    Detail

    Three-way ball valve V153L with internal pipe threads 1 1/2" and electric actuator VCQ002. L ball drilling. For sealing of pipelines of non-aggressive media up to 16 bar in...

    Code: V153L-15VCQ24
    RV600 Check Valves - 1 1/2"
    7 174 Kč –99 %
    RV600 Check Valves - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    The RV600 non-return valves with G1 1/2" threaded connection ensure the flow of the medium in one direction. Pipe clearance DN40. Opening pressure at least 0.8 bar. Made of...

    Code: RV600-15
    vl321L sr kohout pneupohon vzduch automatizace atmatura
    24 068 Kč –100 %
    Three Way Faucet L Single Acting Pneumatic Actuator - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way ball valve assembly with 1 1/2" female threads and single-acting pneumatic actuator. Three-way stopcock in stainless steel version with ball drilling to "L". Drive...

    Code: VL321L-15SR
    vl321T sr kohout pneupohon vzduch automatizace atmatura
    24 068 Kč –100 %
    Three Way Faucet T Single Acting Pneumatic Actuator - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way ball valve assembly with 1 1/2" female threads and single-acting pneumatic actuator. Three-way stopcock in stainless steel version with ball drilling in "T". Drive...

    Code: VL321T-15SR
    V153 sr kohout pneupohon vzduch automatizace atmatura
    14 962 Kč –99 %
    Three-way ball valve V153L with single-acting pneumatic actuator SR - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valves V153L with pneumatic actuator, Assembly of three-way ball valve with internal threads - type V153L and pneumatic actuator Omal type DA or SR, Actuator control...

    Code: V153L-15SR
    vl321T da kohout pneupohon vzduch automatizace atmatura
    20 174 Kč –100 %
    Three-Way Faucet T Double Acting Pneumatic Actuator - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Three-way ball valve assembly with 1 1/2" female threads and double-acting pneumatic actuator. Three-way stopcock in stainless steel version with ball drilling in "T". Drive...

    Code: VL321T-15DA
    V153 da kohout pneupohon vzduch automatizace atmatura
    12 517 Kč –99 %
    Three-way ball valve V153L with double-acting pneumatic actuator DA - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valves V153L with pneumatic actuator, Assembly of three-way ball valve with internal threads - type V153L and pneumatic actuator Omal type DA or SR, Actuator control...

    Code: V153L-15DA
    Stainless Steel Ball Valve - 1 1/2"
    7 929 Kč –5 %
    Stainless Steel Ball Valve - 1 1/2"
    up to 14 days
    6 225 Kč excl. VAT
    7 532 Kč / pcs

    Stainless steel ball valve for food industry in 1 1/2" internal thread. Maximum inlet medium pressure up to 40 bar. Robust flangeless ball valves with AISI 316 stainless steel...

    Code: ART2601-15
    VL521T Ball Valve - 1 1/2"
    9 534 Kč –99 %
    VL521T Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    ball valve for automation VL521T with internal thread 1 1/2" in DN40. Threaded brass ball valves designed for automation with pneumatic or electric actuator. Three-piece direct...

    Code: VL521T-15
    V101 Single Acting SR Ball Valve - 1 1/2"
    11 829 Kč –99 %
    V101 Single Acting SR Ball Valve - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    Direct ball valve V101 with 1 1/2" threaded connection and pneumatic single-acting SR30 actuator operated by compressed air. Drive control pressure of at least 5.5 bar. For...

    Code: V101-15SR
    QVT Hose Valves - 1 1/2"
    18 505 Kč –99 %
    QVT Hose Valves - 1 1/2"
    up to 14 days
    1 Kč excl. VAT
    1 Kč / pcs

    QV hose valves with threaded connection G1 1/2", clearance 25. Connection via internal threads. Made of aluminium with NR cuff for temperatures up to +80°C.

    Code: QVT-15
    Up
    More products