Special offer, Page 2
Bestsellers

Ratchet wrench with 1/2" square drive; gearbox and ball bearings made of hardened materials for long life. Right and left-hand operation for tightening and loosening; working...

Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...

Very powerful impact wrench with 1/2" square drive; equipped with powerful double hammer impact. Right and left-hand operation for tightening and loosening; working pressure 6.3...

V-belt reciprocating compressor with an output pressure of 10 bar designed especially for occasional use in craft applications and for home use. Mobile oil-lubricated version...

Basic AFP filters according to ISO 8573.1 with a filtration capacity of 3 um and an efficiency of 99.9%. FPRO filters are used to remove the largest mechanical impurities from...

The new A49B series of reciprocating compressors in two-stage V-belt design. An output pressure of 11 bar with a 4 kW 400 V electric motor at just 1400 rpm can deliver an...

Modern aluminium pipework for inert gases in green colour, 5.7 m long. Diameter 20/17.4 mm with operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and...

Modern aluminium pipework for inert gases, green in colour, 5.7 m long. Diameter 25/22 mm with operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and...

Angle grinder for grinding and separating metal parts; made of composite materials; minimum weight only 1.78 kg. Equipped with trigger with safety lock, easily removable handle....

Robust belt sander for sanding small surfaces, easy access to narrow spaces; working pressure 6.3 bar. Designed for normal professional use; areas of application: woodworking,...

Guns for pressure extrusion of cartridges with sealants. Smooth sealant delivery thanks to continuous air supply, significant improvement of craftsmanship and material savings....

Tools for simple cutting of window glass from frames, professional use. The rear air outlet reduces noise and diverts airflow away from the work surface. Low vibration and low...

Hose clamp SW1 - 16mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Strength hose clamp SW1 - 25mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...

Strength hose clamp SW1 - 60mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...

Impact wrench with 3/4" chucking square for tightening and loosening screws up to M25. Equipped with double hammer impact driver with max. torque of 1 627 Nm. Extremely short...

Professional V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated version...

Oil-free V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile version with a motor power...

A small piston compressor with an output pressure of 8 bar designed especially for occasional use in craft applications and for home use. Oil-free design with a motor input of...

Professional V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated version...

AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...

Oil-lubricated screw compressor with fixed speed and direct connection of the screw block to the electric motor by means of a flexible coupling. Control is provided by the...

Oil-lubricated screw compressor with fixed speed and direct connection of the screw block to the electric motor by means of a flexible coupling. Control is provided by the...

Pneumatic nail gun for professional use; handle with non-slip rubber coating for good grip during work. Designed for T-nails up to 50 mm high; working pressure 6.3 bar. Designed...

Stainless steel ball valve for food industry in 1 1/2" internal thread. Maximum inlet medium pressure up to 64 bar. Robust ball valves with flange for automation and AISI 316...

Professional reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated design with a...

Professional V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated version...

The new A49B series of reciprocating compressors in two-stage V-belt design. An output pressure of 11 bar with a 4 kW 400 V electric motor at just 1400 rpm can deliver an...

Professional oil-free compressor with V-belts with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile version with 3 kW...

Tyre inflator for tyre inflation in craft and domestic applications. Tightening by lever, venting by button on the back of the gun. Digital display for accurate pressure...

The new A49B series of reciprocating compressors in two-stage V-belt design. An output pressure of 11 bar with a 4 kW 400 V electric motor at just 1400 rpm can deliver an...

The unique XPand piston compressor with integrated hose reel designed to save space in the workshop thanks to practical wall mounting. Oil-free design with an output pressure of...

Hose clamp SW1 - 65 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Hose clamp SW1 - 75 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

The new A49B series of reciprocating compressors in two-stage V-belt design. An output pressure of 11 bar with a 4 kW 400 V electric motor at just 1400 rpm can deliver an...

Angle grinder for grinding and separating metal parts. Equipped with trigger with safety lock, easily removable handle. For 125 mm diameter discs, working pressure 6.3 bar;...

Belt sander for grinding small surfaces, easy access to narrow spaces; working pressure 6.3 bar. Designed for normal professional use; areas of application: woodworking,...

Handle with double-sided valve as accessory for Airquick tyre inflator

Hose clamp SW1 - 55 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Hose clamp SW1 - 80 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...